Here’s an unpublished image from my archive. In the gloom of early morning on April 7, 1989, I made the hour and 15 minute drive from Scottsville to Portage, New York to make time exposures of the old Erie Railroad Portage Viaduct. I featured this pioneering tower-supported viaduct in an earlier post (see: Erie Railroad’s Portage Bridge May 12 2007). Blessed by a stunning setting and significant history, the old Portage Viaduct has been a favorite subject on many occasions over the years. For this image, I used my Leica M2 rangefinder with 50mm Summicron lens to make a long exposure (about 8 seconds) in the pre-dawn twilight. The predominantly blue light combined with Kodachome’s spectral sensitivity to produce a near monochromatic view. The roaring Genesee falls have taken on an otherworldly ethereal quality, while the dark sky lends a nightmarish cast. This image exists only on film; at the time of exposure, it seemed very different to my eye. Later in the morning, an eastward Delaware & Hudson freight eased over the bridge at restricted speed; I followed this for several hours, making numerous images of it, mostly in black & white.
For years, friends have asked my advice on camera exposure, typically on-site with a train bearing down on us. Politely, I’ll offer suggestions—based on conditions, but such advice can be deceiving since conditions change quickly. For my photography, I often refine exposure as the scene unfolds. A train entering a scene may alter my anticipated exposure, which requires subtle adjustments at the last moment.
Using the camera’s histogram to judge exposure is part of my latest technique for refining exposure and making optimum use of the digital camera sensor. A histogram reflects exposure information collected by the sensor. This is displayed as a graph that offers exposure quantification: it shows the range of data recorded by the sensor and alludes to data lost. The histogram allows me to gauge when the scene is over- or under-exposed. It solves much of the guesswork previously necessary when shooting film, while providing real information by which to adjust future exposures. What it doesn’t tell me, is as important to what is displayed on the graph.
Using film, ‘over-exposure’ inferred that too much light reached the emulsion and resulted in an image that appears too bright, while ‘under exposure’ inferred that too little light, thus and a dark image. It was never as simple as that, but that’s good enough for the moment.
The advent of digital imaging combined with the ease of post-processing using digital technology has changed the definitions of exposure, so far as I’m concerned. I can now use information from camera sensor on-site to help capture the greatest amount of information.
This is not much different than my traditional approach to black & white photography. The new tools offered by modern digital cameras have altered my means for calculating exposure. More to the point; the need for obtaining desired visual balance between light and dark in-camera isn’t part of my exposure technique because the appearance of the exposed image in the thumbnail on the camera display doesn’t accurately reflect data collected, while the final image may be best refined after exposure.
Here’s a difference between film and digital: Film sensitivity is less definitive than with digital sensors; simply, the data accumulated during a digital exposure fits between definite parameters, while with film significantly more information may be retained than is readily visible to the naked eye. Beyond these limits with digital, data isn’t recorded (to the best of my understanding). Thus to obtain the greatest amount of visual information a digital exposure must be calculated to be carefully placed between the image’s deepest shadows and brightest highlights. The tool needed to gauge this decision is the camera’s histogram.
A histogram displays a series of lines progressing from dark to light. These lines reflect the number of pixels exposed in the various gradations. How this data is collected isn’t important for this exercise. Crucial, is the assessment of the histogram in order to make future exposures that don’t lose critical information in extreme highlight or shadow areas.
When I make snow photos, I expose in a manner to place the bulk of information toward the center of the graph. I pay close attention to highlight falloff. Losing detail in the brightest parts of distant clouds, or at the center of locomotive headlights isn’t a problem, but losing detail in snowy foreground is undesirable. Ideally, the graph will taper gently into the extremes, indicating the smallest degree of loss in the deepest shadows and brightest highlights.
The histogram is extremely useful when exposing bright snow scenes, because most camera automatic settings are not tuned to expose for large fields of white and tend to grossly misjudge a brightly lit and largely white scene. This typically results in under exposure which renders snow gray rather than white and, risks opaque shadows (a substantial loss of information). It renders many elements too dark (such as the train passing through the scene). However, a few modern digital cameras have ‘snow settings’ that should overcome these difficulties.
Before making my desired image sequence, I’ll make a series of test exposures to check the effect of camera settings. Based on information displayed by these graphs I’ll make exposure adjustments to place highlights and shadows appropriately. As my subject approaches, I’ll further refine my exposure by making adjustments in 1/3-stop increments. I’ll continue to compensate for exposure changes caused by the train entering the scene (including variations caused by locomotive headlights and ditch lights).
Displayed here are both hypothetical graphs to show how I read histograms, and images of the real graphs from my Canon 7D exposed in snowy scenes last Sunday, February 10, 2013. Both types of images are intended to illustrate how I’ve selected exposures.
I use the histogram feature all the time, but find it most useful in extreme situations. It has proved its value by eliminating uncertainties previously caused by the extremes of snow photography.
Some advice for the graph-adverse photographer working in snow: use the camera meter to gauge base exposure then override the meter by opening up by 2/3 of a stop (for example open from f11 to f9).
CSX light engines roll through CP83 at Palmer, Massachusetts on February 10, 2013.
I’m not talking about stripping down and running naked through the snow. That sounds like a recipe for frostbite, hypothermia or worse! Rather, I’m focused on how to best select exposure when working in winter situations. Snow is especially difficult to work with for several reasons. First, it’s abnormally bright and results in high contrast situations that is both difficult on the eyes and the camera sensor. Second, most camera meters aren’t designed to work with fields of white, so tend to recommend the wrong settings. Third, for many photographers, making images in snow is an infrequent experience, and one that tends to lead to uncertainty and higher rates of exposure error.
A blizzard blanketed the Berkshires with 3-4 feet of snow during second week of December 1992. On the morning of Dec 15, 1992, I caught a Conrail C36-7 leading a pair of SD40-2s on TV9 climbing westward through the deep cut at Washington, Massachusetts. While parking was difficult (drifts up to seven feet tall block all the usual spots, so I left the car in the road with its four-way lights flashing) the real challenge was selecting the best possible exposure for this backlit snow scene. The image was exposed using my Nikon F3T and f4.0 200mm lens. My exposure was about f5.6 1/250 second on Kodachrome 25.
My approach to snow photography stems from years of practice. In general, I take the information provided by camera meters as advisory. I rarely rely on automatic settings without some manual adjustment. Why? I’ve learned to carefully gauge exposure and apply settings manually. Furthermore, I’m distrustful of automatic metering, especially for railway photography, because the automation is programmed to deliver adequate imagery other than what I’m trying to achieve. Perhaps no other situation is as difficult for a common-meter to gauge as sunlit snow imaging.
Many years ago, my father lent me a Weston Master III, and instructed me to wander around the house making exposures and write them down. No photos were exposed. I was about nine and I found this exercise confusing and frustrating because I didn’t understand what I was supposed to be doing. However, I overcame frustration and learned to use the light meter. A decade later, I had the opportunity to learn Cibachrome printing (used to make vivid prints from color slides). At the time, I was primarily working with Kodachrome 25, which I’d been taught to nominally underexpose to produce more saturated colors.
Translating Kodachrome to Cibachrome was revealing; I’d found that my rich, slightly-underexposed slides, which when projected on a nice bright screen looked fantastic, were in fact rather difficult to print. The biggest issue was contrast. While under-exposure may have enhanced the color saturation, it also made the image more contrasty. So while it turned out that my old theory on underexposure had it flaws, I discovered that slightly overexposed slides printed very well. I needed to determine ideal exposures in order to make optimal slides.
Aiding my efforts was my notebook; I’d been recording my exposures for years, but with the Ciba exercise I began making even more detailed notes, recording slide exposures to the third of a stop. Eventually, I assembled a chart with ideal exposures for Kodachrome 25 in various lighting situations. In general, I’d discovered that to make prints, slides needed to be about 1/3 stop brighter than I’d been making them for projection. All very well, but what does this have to do with making digital images in the snow?
Exposing Kodachrome is history, but the lessons I learned from this material still apply. (The short answer to the question was that snow in bright daylight should be exposed at approximately 1 ½ stops down from the full daylight setting without snow; thus with Kodachrome 25, if my normal daylight setting was f4.5 1/250, my snow exposure was about f8 1/250 +/- 1/3 stop). Many of my slides have appeared in books, magazines, as well as here on Tracking the Light. Take a look at my recent book North American Locomotives for some top-notch printed reproductions of Kodachrome.
Digital photography offers some great advantages over Kodachrome, including the ability to review images on-site—thus removing the uncertainty of exposing slides and having to wait for days (or weeks) to see if your exposures were correct. It’s now easier than ever to make good snow exposures and learn immediately from miscalculation. Related to this is the ability to use a digital camera’s histogram as an on-site exposure tool.
Histogram? Yes! This is perhaps the greatest feature on my digital cameras. It allows me to set my exposure ideally, allowing key images to capture the greatest amount information, thus minimizing detail lost through unwanted under-or over-exposure. Positively invaluable when making images in the snow.
Sunday February 10, 2013, I made this image of New England Central GP38s climbing State Line Hill at the Route 32 crossing South Monson. Nearly 61 years ago, Bob Buck exposed an image of Central Vermont 2-8-0s 462 and 468 leading a southward freight from the same angle at this crossing. There were fewer trees back then! See page 66 of my North American Locomotives for a full page reproduction of Bob’s dramatic B&W photograph.
Today, before a train enters the scene, I’ll make a series of test exposures and judge them by the output of the histogram. This allows me to refine my exposure to a point that exceeds what I could have achieved with my detailed chart and Kodachrome. In my next post, I’ll detail this process with more examples.
On command, my Canon 7D offers a variety of useful information. Here’s the in-camera thumbnail of NECR’s GP38s crossing Rt32 in South Monson with relevant histogram as displayed on camera screen. Learning to interpret the graph is extremely useful in making exposures in difficult situations. While I’ve balanced the exposure to favor detail on the locomotives, I’ve managed to retain satisfactory levels of detail in the piles of snow both side of the tracks. The image was exposed using my Canon 40mm Pancake lens.
Shafts of morning sun illuminate exhaust from the Palmer yard office, while snow is blown from tracks at New England Central’s yard on February 10, 2013. Temperature = 0 Fahrenheit; image exposed digitally with a Canon 7D and 200mm lens; ISO 200.
The media loves storms; and they always have. New England’s first big snowfall of the on February 8th and 9th, seems to have made news everywhere. Friends from London called to say that the New England storm was a lead-in story on BBC.
New England Central at Washington Street, Monson—looking north before the storm, Friday February 8, 2013. Lumix LX-3 photo.Two days later: New England Central at Washington Street, Monson—looking north after the storm, Sunday February 10, 2013. Lumix LX-3 photo.
On the morning the snow began, I made a few photos at Washington Street in Monson with my Lumix LX-3 (for later comparison). Historically this was the site of Monson’s railway station, gone nearly 60 years now. Blankets of snow fell on Monson, Massachusetts through the day on Friday and into Saturday. I spent Saturday clearing off cars and whatnot, as you do after a heavy snowfall. The railroads were quiet, and a general ban on highway travel, plus dire road conditions discouraged me from going anywhere to make photos.
Churning blades of the snow-blower clearing Palmer yard. Canon 7D with 200mm lens.
Clearing New England Central’s Palmer Yard on February 10, 2013. Canon 7D with 200mm lens.New England Central’s Palmer Yard on February 10, 2013.
This morning (February 10, 2013) I aimed for Palmer, where it was clear and bright, but all of 1 degree Fahrenheit. Between 18 inches and 2 feet of snow covered the ground, with drifts several feet deep in places. Yes, it was a good dump, but not a record by my estimation. I’ve seen more snow.
Clearing New England Central’s yard was a bucket loader fitted with a snow blower. This made for a few impressive scenes, which I’ve tried to capture here. However, in general, traffic on the railways was quiet. CSX sent a set of light engines east. These stopped about a mile west of Palmer (milepost 84.5) because what I understood to be an axle problem with one of the General Electric locomotives. After a few minutes, these were on the move, and I made some views of CSX passing the old Palmer Union Station at CP83—now occupied by the Steaming Tender restaurant—a favorite eating place of mine.
Mid-morning on February 10, 2013, CSX light engines roll eastward passed CP83 in Palmer, Massachusetts. The old Palmer Union Station is now the Steaming Tender restaurant. Canon 7D with 28-135 zoom lens. Exposed at ISO 200 f10, 1/1000 second, metered manually.
About noon, New England Central dispatched a pair of GP38s south as ‘Extra 608’. Although once standard, today finding a pair of New England Central’s yellow and blue GP38s together is a rare treat. These ambled southward through Monson over Stateline Hill (so named because it crests near the Massachusetts-Connecticut border), which allowed ample opportunities for photographs. Extra 608 was destined for Willimantic to help clear the line and collect interchange left by the Providence & Worcester. All in all, this was a productive day for photography. I worked with my Lumix LX-3, Canon 7D, and Canon EOS-3. The Velvia 50 I exposed won’t be processed for a while; I’m on the big green bird tomorrow afternoon! Perhaps while traveling, I’ll write a detailed post on my experience exposing railway images in the snow.
New England Central extra 608 approaches Bridge Street in Monson, Massachusetts on February 10, 2013. Canon 7D with 100mm f2.0 lens.New England Central extra 608 at Stafford Springs, Connecticut on February 10, 2013. Lumix LX-3 photo.Trailing view of New England Central GP38s passing Stafford Springs, Connecticut. Canon 7D with 40mm pancake lens.
Artificial light illuminates the snow at New England Central’s Palmer, Massachusetts yard office on the evening of February 22, 2011. How much snow covers the yard tonight? And how much will be there by Saturday morning (February 9, 2013)? Exposed with Lumix LX-3 on a Bogen tripod. Set on aperture priority mode, f3.5 at ISO 80, with a plus 1 stop override to compensate for snow and artificial lights. If I’d allowed the camera to pick the exposure without compensation, an underexposed (dark) image would have resulted.
Tonight (February 8, 2013) a blizzard rages outside the window. The roads are closed, the railroad is quiet (so far as I know), and I’m not out, knee-deep in snow, trying to make night photos. (Ok, so I’m as mad as hatter, or worse—used to be lots of hatters here in Monson, back in the day.) However, I pulled up an image from my digital archive of Florida East Coast GP40-2 417 at New England Central’s Palmer Yard office on February 22, 2011. There’s something incongruous about a Florida East Coast locomotive in the snow. I’d met Bob Buck of Tucker’s Hobbies that evening for dinner, and later we’d stopped by Palmer yard to see what was about.
Since that night, nearly two years ago, New England Central has applied its own lettering to several former Florida East Coast locomotives; Bob has passed on; and New England Central has become part of the Genesee & Wyoming short line railway empire. Everything changes.
Braving frigid temperatures to take advantage of incredible low-light; on this day, three years ago (February 8, 2010), Pat Yough, Chris Guss & I were in Toronto photographing in suitably arctic conditions. Cold but clear—there’s a fantastic, surreal quality of light in sub-zero temperatures which can lead to great images if you chose to endure the conditions. Not, only were we up early, but the night before we spent an hour or more making night shots from the Bathurst Street Bridge. It didn’t get any warmer by daybreak, which we photographed from the lake front west of the city center. On that morning, after setting up the tripod, my numb hands only managed to record in my note book, “0646 [6:46 am]—ugg. Twilight—cold.”
View from Bathurst Street, Toronto approaching Midnight on February 7, 2010. Lumix LX-3 time exposure.Sunrise on Lake Ontario, February 8, 2010. Lumix LX-3 on tripod.
While we made an intense tour of Toronto area railroading, among the most memorable images were those exposed toward the end of daylight near Queensway & King Streets along the Canadian National quad-track line west of Union Station. This is one of the busiest lines in Canada, and hosts a flurry of trains at rush hour. For me the highlight was a pair of in-bound GO Transit trains with new MP40PHs running side-by-side as the sun hugged the horizon over lake Ontario. A few minutes later, I scored a VIA train gliding under a signal bridge in last glint of sunlight. At the time, I was still working primarily with film, and I kept both Canon EOS-3s busy. One was fitted with my 100-400 IS zoom, the other with a 24mm AF lens. The only digital camera I had was my Lumix LX-3, which I learned tends to chew through battery power in sub-zero conditions. By the end of the day, I’d drained three full batteries. The McDonalds on King Street made for a nice place to thaw hands on cups of hot chocolate while watching TTC’s trams glide by at dusk. On the way back we swung by Niagara Falls, my first visit to the famous waterfall, despite having photographed trains crossing the gorge on several occasions over the years.
Eastward GO Transit trains near Sunnyside at sunset on February 8, 2010. Canon EOS-3 with 100-400 zoom; Fujichrome RVP-100, exposure not recorded.Eastward GO Transit trains near Sunnyside at sunset on February 8, 2010. Canon EOS-3 with 24mm lens; Fujichrome RVP-100, exposure not recorded.Eastward VIA Rail train approaches Sunnyside at sunset on February 8, 2010. Canon EOS-3 with 100-400 zoom; Fujichrome RVP-100, exposure not recorded.View of TTC streetcar on King Street from McDonalds on corner of Roncesvalles Avenue and Queen at dusk on February 8, 2010. Lumix LX-3 ISO 80 at f2.8.TTC Streetcar at corner of King and Queen Streets, Sunnyside, Toronto, February 8, 2010. Lumix LX-3 set at ISO 80.Time exposure of Niagara Falls from the Ontario side. Exposed digitally with a Lumix LX-3 on a Bogan tripod.
Changing skies on Montana’s Marias Pass. On July 6, 1994, an eastward intermodal train approaches Grizzly on the former Great Northern mainline. I exposed this image less than a week after announcement of the Burlington Northern-Santa Fe merger. Nikon F3T with f1.8 105mm lens; exposed on Kodachrome 25.Montana Rail Link light helpers on the former Northern Pacific grade over Mullen Pass, west of Helena, Montana on July 9, 1994. Kodachrome 25 film exposed with a Nikon F3T with 35mm PC lens.
Look up, take in the heavens and transform a railway scene in to a cosmic image. That’s a theory anyway. During my 1994 visit to Montana, I was awed by the amazing skies for which the state is famous. Big sky and wide-open vistas can make for impressive railway images, yet getting the balance between right between atmosphere and railway is no easy chore. Here, I’m offering two of my most successful attempts. Both were exposed on Kodachrome 25 using my Nikon F3T. The peculiarities of Kodachrome’s spectral sensitivity made it a great medium for working with textural skies and dramatic lighting. Not only did Kodachrome 25 benefit from exceptional dynamic range, but also the way it translated blue light I found conducive to dramatic images featuring impressive skies.
While these slides look great when projected on a screen, and both were successfully reproduced in my 2005 book Burlington Northern Santa Fe Railway, I found they required a bit of adjustment using Adobe Photoshop to make them look good on the computer screen.
Different tools yield different results and I wonder how I might I use my Canon 7D or Lumix LX-3 in similar lighting situations.
In June 1993, I traveled with fellow photographer Brian Jennison to eastern Oregon to make images of Union Pacific’s Challenger (locomotive 3985) which was working its way east over the Blue Mountain grades. After a couple of days with the steam locomotive, we wandered into central Idaho, exploring locations along the Union Pacific mainline. This image was made looking east toward the Snake River at UP’s timetable location called Reverse (Idaho Division, Third Subdivision at milepost 393 between Glenns Ferry and Mountain Home). Have you noticed there’s been a theme over the last few days?
Nikon F3T with 28mm AF lens exposed on Kodachrome 25 at f8 1/125 second.
Watch out for rattlesnakes! It seems like a clichéd railfan warning. Although, I’ve encountered rattlers on several occasions, I’d not allowed fear of snakes (or heights) interfere with my photography. In July 1994, I was on a prolonged trip working my way east from San Francisco to Waukesha, Wisconsin. Part of this excursion, was a ten-day exploration of Montana. Working on a tip from Blair Kooistra regarding a interesting photo location, I’d driven down the long rocky road to the old station at Lombard, deep within the canyon of the same name. Back in the day, it was here that Milwaukee Road’s Pacific Extension crossed Northern Pacific’s mainline. In 1994, as today, only vestiges survive of Milwaukee Road, while Montana Rail Link’s former NP line is the main attraction (if one hopes to see trains moving; the industrial archeologist is likely more interested in the old Milwaukee electrified line). The point of interest, which I’m told featured some GRS upper quadrant semaphores, required a several mile walk west into the canyon.
A large snake (of the non-rattling variety) suns itself on Montana Rail Link in Lombard Canyon, Montana. Nikon F3T with 105mm lens; Kodachrom 25 exposed at f4.5 1/250th second
I’d made it about a mile or two from the car when I had an unsettling feeling of being watched. Looking around I realized that several impressively large snakes were sunning themselves on the tracks and eyeing my progress. I determined, that while large, these snakes didn’t have rattles on them, and so probably wouldn’t harm me. I made a few photos of this one coiled in the gauge. Then I continued my westward hike when the bone chilling rattle of the dreaded serpent stopped me dead in the tracks. I looked cautiously to my left, and there coiled in a heap, between the tracks and the river, was by far the largest rattlesnake I’d ever seen. It didn’t look nice. Worse, it seemed poised as about to spring and gazing at me with its tongue listing back and forth. Thus ended my westward progress. There I was, a two mile walk from my car in an unpopulated barren canyon, with probably 20-30 mile drive to anyplace with a phone, and me not having a soul on the planet knowing where I stood! Not good.
Without making sudden moves, I reversed direction and carefully retreated on foot back toward the old Lombard station location where my car sat waiting for me. Thankfully, that was the last time I’ve encountered such a beast trackside. Unfortunately, the semaphore I’d hoped to photograph is now long gone. Where’s the photo of the momma rattler? I didn’t make one, primarily because it was lying in deep shadow and I was in bright sun. (Which is as good an excuse as any).
Railway tracks; classic converging lines aimed toward distant horizons, a symbol of progress and travel, and often the primary subject of for my camera’s lens. Here I’ve presented just two images of railway tracks. One is of the throat to DB‘s Frankfurt Hauptbahnhof (Frankfurt am Main, Germany) the other is yard trackage on Pennsylvania’s narrow gauge East Broad Top Railroad at Orbisonia. The German photograph portrays well-maintained, heavily used infrastructure with ladders of double slip switches designed to maximize route flexibility. This was made on a sunny summer evening and exposed to retain detail in ballast and avoiding a harsh silhouette (although that can be an effective imaging technique). By contrast, the East Broad Top image shows a preserved three-way stub switch, representing a vestige of lightly built 19th century-style infrastructure, and exposed in the soft light of a foggy autumn morning. In both images railway tracks lead the viewer’s eye out of the frame to unseen horizons. To allow for a level of intrigue. I’ve deliberately masked where the tracks lead.
Frankfurt Hauptbahnhof, June 13, 2001.East Broad Top Rock Hill Furnace Oct 12 1997.
Both images were exposed on Fujichrome slide film with my Nikon N90S.
Many years ago my dad advised me, ‘photograph everything, because everything changes’. In October 2002, I made this photograph of Green Mountain Railroad’s excursion train passing the wooden covered truss at Bartonsville, Vermont. At the time this was a seasonal daily occurrence. While I was fond of the vintage Alco diesel, there was nothing unusual about the scene, and there was no special urgency in capturing the moment. Today, this image is a prize, but not for the Alco, which remains in excellent condition—I photographed it again last summer at White River Junction where it was positioned to power a Vermont Rail System excursion. The old covered bridge is only a memory today. It stood here since the 1870s, but on August 28, 2011 it was swept away by flood waters caused by Hurricane Irene. Its temporary replacement wasn’t as interesting to photograph; thankfully a replica truss bridge is under construction.
Exposed this image on Fujichrome with a Contax G2 rangefinder fitted with a Zeiss 28mm Biogon lens.
This weekend (January 26-27, 2013) is the annual Big Railroad Hobby Show sponsored by the Amherst Railway Society. It fills four buildings at the Eastern States Exposition grounds at West Springfield, Massachusetts and attracts tens of thousands of visitors. For railway enthusiasts it’s an epic event and an annual pilgrimage. The show is the living testimony of the late Bob Buck—long time show director and proprietor of Tucker’s Hobbies. Through clever marketing, unceasing persistence and a life-long passion for trains of all scales, Bob built the show from a small railroad hobby event into a massive one. Although Bob passed away in October 2011, the show remains one of his legacies. Last year the society honored Bob with a minute of silence before the show opened; I’m told you could hear a pin drop across the exposition grounds.
Rich Reed proudly displays a Bob Buck pin.
My interest in the show is a direct result of my friendship with Bob. Not only was he one of my most enthusiastic supporters, encouraging my photography from a very young age and promoting my work (and later my books), but also he urged me to photograph the show, sometimes commissioning me to make both publicity and documentary images.
For the photographer the show is a visually intense and challenging image making opportunity. Thanks to Bob I’d been photographing the show for more than 30 years. In my younger days I’d fumble through the day and churn through 6-8 rolls of 35mm black & white film, and then try to find a half dozen useable images. While digital photography is a godsend, it hasn’t got that much easier. What’s the difficulty? Thousands of people are packed into the grounds all jostling for views of layouts, while haggling over boxcar kits, rummaging through back issues of magazines and regaling one another with tales of the year’s events. At every step you are confronted with someone bumping you, standing in your way, or thrusting an elbow into your lens. Garish and harsh artificial lighting makes for odd contrast and peculiar color balance while inserting unwanted highlights all over the place. The disparity of scale between the spectators and railway models presents a depth of field nightmare. For the casual viewer the show is pure sensory overload. For the photographer it’s chaos.
Yet, I always bring my cameras. These days I primarily aim to make photos of my friends, my heroes, and the model trains that catch my eye. It’s a complete contrast from my efforts working with ‘prototype’ trains. Yet, when photographing scale trains, I apply many of the same techniques that I use for the larger ones. Here’s just a sampling of today’s efforts.
Highball Productions
Slice of Light photographyPromoting the Steaming Tender; the region’s favorite railway themed restaurant (located in the old Palmer, Massachusetts Union Station).Tucker’s Hobbies.
My North American Locomotives is dedicated to Robert A. Buck.
Reviewing Bob Buck’s work in North American Locomotives.
Yesterday, January 25, 2013 proved to be a productive day for photography. My friend and fellow photographer Pat Yough had come up for the annual Amherst Railway Society ‘Big Railroad Hobby Show’ at the ‘Big E’ in West Springfield, Massachusetts, and as this was the day before the show we spent the day photographing around Palmer, Massachusetts. I hadn’t intended to specifically make grade crossing photos, but as I was reviewing my results, I noted this as the theme to the day’s photography. I’ve included a few here.
Mass-Central’s weekday freight led by NW5 2100 crosses Route 181 in Palmer, Massachusetts on the morning of January 25, 2013. First out at the crossing is the company HyRail truck. Canon 7D with 40mm Pancake Lens; ISO 200 1/250th second at f4.5. In camera JPG without modification to the file except for scaling for web. A RAW image was exposed in parallel with the Jpg.
Grade crossings offer interesting venues to photograph trains; here modes cross and so this provides opportunities to picture the railroad in its environment. For many observers, the grade crossing is the only place where they see trains. Unfortunately, crossings are not always merely benign interfaces. In a world with seemingly infinite distractions, to the non-enthusiast it might seem that a train appears out of nowhere and crosses the road. Nor does everyone find the same thrill of watching a train a crossing. More startling is when a motorist sails through a crossing, oblivious to tonnage bearing down upon them. The results don’t always favor the hapless. Ironically, waiting for me when I got home yesterday was the link to a recent video of truck-train collision on the Vermont Rail System that occurred a few days ago.
Near the Massachusetts-Connecticut Stateline, New England Central’s former Central Vermont Railway mainline cross Route 32 (which runs from Keene, New Hampshire via Palmer and Monson, Massachusetts to New London, Connecticut). Just north of the stateline New England Central freight 608 crosses Route 32 southbound on January 25, 2013. Canon 7D with 100mm lens; ISO 400 1/500th second at f9.0New England Central GP38 3850 leads train 608 at Stafford Springs on January 25, 2013. A series of difficult crossings in Stafford Springs is the primary reason for a 10 mph slow order through town. Especially difficult is this crossing, where the view of the tracks is blocked by a brick-building. Protection is offered by a combination of grade crossing flashers and traffic lights. Canon 7D with 40mm Pancake Lens; ISO 400 1/500th second at f8.0. In camera JPG modified with slight cropping to correct level and scaling for web. A RAW image was exposed simultaneously with the Jpg.
East Deerfield Yard during a snow squall on the evening of January 21, 2013. Photo exposed with a Canon 7D and 100mm f2.0 telephoto lens mounted on a Bogan tripod; ISO 200 set a f4.0 for 21 seconds.
It’s been a long time since the old tower at the west-end of Pan Am Southern’s former Boston & Maine yard served as intended. Yet it survives as a landmark and lends to the heritage of the place. I’ve photographed this building many times over the years; by day, by night, by sun, and in the fog. This Monday evening (January 21, 2013), I exposed a few time exposures during a snow-squall. The lightly falling snow diffused the light from the yard making for an eerie glow—a quality of light well suited to night-photography. Finding a focus-point in the dark was a challenge, as was remaining out in the frosty evening while the camera exposed the photos.
Canon EOS-3 with f2.0 100mm lens on Fujichrome Provia100F slide film. This was metered manually to emphasize the cobble stone street.
Olomouc is a moderately-sized city off the beaten path in today’s Czech Republic. Historically it was the capital of Moravia in the old Hapsburg Empire and shares an architectural heritage with the Czech capital, Prague. Yet, it is a more compact, digestible version of Prague. The tourists haven’t ‘discovered’ Olomouc, and it has all those old-world central European qualities that I find fascinating and exciting to photograph, including a classic tram system. I’ve visited several times and this image was made shortly after sunrise on a September 2008 trip. Cobblestones make for a classic foreground as a Tatra T3 tram grinds its way from the railway station toward the city center. Olomouc has several tram routes and service is very frequent.
Pan Am 610 leads symbol freight POED west at the Groton-Harvard Road crossing near Flannagan’s in Ayer, Massachusetts on the afternoon of January 17, 2013. Exposed with my Canon 7D with 28-135mm lens, set at 135mm; 200 ISO f8.0 1/500th; in camera Jpg, no adjustments except for scaling.
Yesterday (January 17, 2013), Rich Reed and I spent a productive day photographing along the old Boston & Maine. B&M to Pan Am: a traditional New England road, Boston & Maine was melded in to Guilford Transportation Industries in 1982. Guilford acquired the rights to Pan American Airways in 1998, and during 2005-2006 the railroad became known as Pan Am Railways. In 2008, the railway engaged in a joint venture with Norfolk Southern involving the former Boston & Maine route (now coined the ‘Patriot Corridor’) between greater Albany, New York and suburban Boston. As a result, Norfolk Southern locomotives are usual assigned to intermodal and automotive traffic operating over the old B&M route; in addition Pan Am operates a pair of through freights in conjunction with CSX between Portland, Maine and CSX’s Selkirk, New York yard (Pan-Am’s symbols SEPO/POSE; CSX’s Q426/Q427). These typically operate with CSX locomotives. Other traffic includes, coal trains originating on Providence & Worcester and traveling north via Pan Am rails to Bow, New Hampshire which run with P&W’s locomotives. Pan Am runs a few trains with its own locomotives; however while a number of Pan Am’s locomotives have been painted for the railroad, a good number of older locomotives still serve the railroad in Guilford paint.
The long and short of this essay is that lately, I’ve found it challenging to photograph Pan Am painted locomotives hauling trains on their own line, since the predominance of daylight traffic tends to feature locomotives from other lines. Yesterday, we caught six symbol freights, one of which was the westward POED (Portland, Maine to East Deerfield, Massachusetts), which was led by Pan Railways 610, a former Southern Pacific SD45 rebuilt to SD40-2 specs. Pan Am on Pan Am! Yea!
Pan Am 610 with POED at Shirley, Massachusetts. Canon 7D with 28-135mm lens, set at 33mm; 200 ISO f7.0 1/500th. Photo scaled from in-camera JPG file; compare this image with adjusted RAW file below.Pan Am 610 with POED at Shirley; this is a camera RAW image, adjusted using Photoshop to compensate for exposure (specifically to better retain detail in the snow, sky, and shadow areas), with nominal adjustments in color balance and edge sharpening.
Excerpt of my article in the January 2013 ModellEisenBahnerCover of January 2013 ModellEisenbahner
My article on Electro-Motive’s AC traction diesels is featured in the January 2013 issue of Germany’s ModellEisenBahner. This deluxe glossy publication offers superb photo reproduction and my images of Burlington Northern SD70MAC and Conrail SD80MACs are top notch. My detailed text for the article was translated into German by my editor Stefan Alkofer. I’m credited for photography and writing at the end of the article as per the magazine’s style. These American diesels are of interest to German readers because that use Siemen AG’s three-phase traction system and so represent a successful application of German technology on American railroads. In my travels, I’ve had the opportunity to photograph Electro-Motive’s various AC traction diesel models across the United States. These images have also been featured in a variety of American publications, including my latest book North American Locomotives.
In addition, a special ModellEisenBahner issue (MEB-Spezial Nr. 15) that focuses on American railways and American photographers features a short article I wrote on my father’s first visit to Germany in 1960 along with several of his vintage photos. My dad’s photos also help illustrate a detailed article on New York Central in the same issue.
January 15th, a day of significance: while best known as Martin Luther King Jr.’s birthday, it is less well known for the anniversary of the 1953 Washington Union Terminal crash, when Pennsylvania Railroad’s Federal Express lost its brakes and GG1 Electric 4876 careened into the lobby of the terminal. This spectacular train wreck, on the eve of Eisenhower’s inauguration, made headlines in every major newspaper across the country.
That was 60 years ago today! However, thirty years ago, GG1 4876—then operated by NJ Transit, was still in daily service. It routinely worked between Penn Station and South Amboy on New York & Long Branch trains. I intercepted this infamous electric on various occasions in its final years of service. I’d hoped to make a photo on the anniversary of its infamy. And I went so far as to write NJ Transit to find out which trains it would be working, to which they kindly replied in detail. However a snowstorm on eve of 4876’s 30th anniversary precluded my travel, so my intended images from that day never happened. What I’ve posted here are few of my black & white images scanned from 1980s-era prints. They were exposed with my battle-worn Leica IIIA from my High School days. I processed the film in the kitchen sink using a weak mix of Kodak Microdol-X.
GG1 4876 at Sunnyside Yard, Queens, New York in April 1979. Leica IIIA w 90mm f2.8 Elmar fitted with Leica Visoflex.
New Jersey DOT GG1 4876 at Rahway Junction in 1982. Leica IIIA w 50mm f2.0 Summitar.
In August 1984, I made a ten-day adventure of riding Amtrak. I visited Montreal via the Montrealer, then to Washington D.C., where I boarded the Cardinal for Chicago. It was my first visit to America’s ‘Railroad Capital’; I spent three days wandering around, riding trains and transit, exposing every frame of film I brought with me. At that time, my standard camera was a 1937-built Leica IIIA that my father gave me for my 10th birthday. In addition to this Leica, for this trip, my dad gave me loan of its clone, which he’d bought years before complete with wind-up mechanical drive. Since the drive was weighty, I left it at home. Fitted to this camera was an obsolete collapsible Leitz 50mm Elmar with non-standard f-stops (f3.5, f4.5, f6.3, f9 & etc). While a remarkably sharp piece of glass, this lens suffered from antique coatings that made it inadequate for my color photography and made it susceptible to excessive flare. As a result, I relegated this lens to my B&W work, while using my 50mm f2.0 Summitar for color slides. Among the B&W photos I made was this image of Chicago Regional Transportation Authority F40PH 161 at Chicago & North Western Station.
Chicago, August 19, 1984. Exposed with Lecia IIIA and 50mm Elmar lens using Kodak Safety Film 5063 (bulk loaded Tri-x 400) rated at ISO 400, processed in Microdol-X.
What I remember best from this solo trip was arriving in Evanston, Illinois, where I had a pre-booked and pre-paid hotel room waiting for me, only to be told in a sneering manner by the woman at the desk that I, ‘wasn’t allowed to stay at the hotel, because I was a minor’. She then began to admonish me for traveling alone! I was 17. I was incensed! “Lady, I’ve been traveling for weeks by myself, and you’re the first to cause me a problem because of my age! So! You’d rather have me on the street than in your hotel?” I walked out. Not one to waste time, I resorted to staying in the Evanston YMCA, which was primitive, but adequate, cheap, and didn’t interfere with my travel because of age.
Southward New England Central freight along Plains Road, near Sweetheart Lake, south of Stafford, Connecticut shortly after sunrise on January 13, 2013. Canon 7D with 40mm ‘Pancake’ lens; ISO 200 f4.5 at 1.500th second—intentionally ‘underexposed’ and adjusted in post processing using Photoshop to maintain desired detail and balance in highlight and shadow areas.
One of the benefits of my visits to Monson, Massachusetts, is being within ear-shot of the former Central Vermont Railway, now operated by New England Central (NECR). Yesterday morning (January 10, 2013), I awoke to the sounds of a southward freight clawing its way up Stateline Hill (so-named because it crests near the Massachusetts-Connecticut state line). NECR freights take their time ascending the grade and on a clear day I can hear them climbing from about the time they depart the Palmer Yard. As a kid I’d count the crossings: CV’s GP9s whistling a sequence of mournful blasts for each one. Yesterday morning I dithered for a few minutes. Should I go after this train? Or, should I keep my nose to grindstone, writing? Clear skies forced the answer: GO!
My hesitation caused me to miss the opportunity for a photograph in Stafford Springs, Connecticut. This was blessing in disguise, since I’ve often caught the train here and then broke off the chase before getting deeper into Connecticut. Having missed Stafford Springs, I pursued further south, and caught the train four times at various points between Stafford and Willimantic. This a relatively easy chase, as Route 32 runs roughly parallel to the line.
Three elements made yesterday’s chase a satisfying exercise:
1) The train was operating at a suitable time of the morning for southward daylight photography (lately, NECR’s trains seem to have headed south either way too early or too late in the day for my photographic preferences—I’ve been photographing this line for more than 30 years, first chasing it with my Dad in the early 1980s, so I can be unusually choosy).
2) It was a ‘clear blue dome’—sunny, bright, and cloudless, always a great time to make morning photographs.
3) As it turned out, one of New England Central’s yellow and blue GP38s was leading. As I’ve mentioned previously, while this was once NECR’s standard locomotive, in recent years the type has become comparatively scarce on NECR, with many of the locomotives working the line wearing paint of former operators (Conrail, Union Pacific, Florida East Coast, and others).
I was also eager for a clear day to test some recently acquired equipment, especially my new Canon 40mm Pancake Lens, which arrived on Monday. I’ll make this lens the detailed topic of future posts.
New England Central’s southward freight approaches Mansfield Depot, Connecticut. Canon 7D with f2.8 200mm lens; ISO f5.6 at 1/1000 second, ‘Landscape’ ‘picture style’ (no adjustments except for scaling).
After abandoning NECR at Willimantic, I made a few photographs of the town, which still has some wonderful old mill buildings, then continued south to New London where I focused on Amtrak for a while.
Since New England Central is among properties recently acquired by Genesee & Wyoming, I’m anticipating change and wondering when I’ll photograph the first orange & black locomotives
See my recent published book North American Locomotives for more information on New England Central’s and Genesee & Wyoming locomotives.
New England Central at Willimantic Yard as viewed from the famous footbridge (must be famous, it has its own plaque). NECR shares this yard with Providence & Worcester with which it interchanges traffic. Canon 7D with f2.8 200mm lens; ISO f8 at 1/640 second, ‘Landscape’ ‘picture style’ (no adjustments except for scaling).Old thread mills at Willimantic, Connecticut. Exposed using Canon 7D with 40mm ‘Pancake’ lens; f9.0 at 1/500th second, no adjustments except for scaling.
Killarney, County Kerry, Ireland. Exposed on Fujichrome with a Nikon N90s.
Ireland Through a Magic Lens is the title of my upcoming illustrated talk sponsored by the Warren, Massachusetts Public Library. This will be presented at 7pm on Wednesday January 16, 2013 at the Warren Senior Center in West Warren, Massachusetts.
Address: 2252 Main Street (Rt 67), West Warren, MA 01092.
On this day in 1996, I was on a whirlwind tour of Chicagoland with the late Mike Abalos. We began our photography at Santa Fe’s Willow Springs yard and worked our way east through the industrial areas south of the Loop. My primary interest was photographing the myriad varieties of signaling active in the Chicago area, and Mike was just the man to get me to all the right places. This image was made near the end of daylight at State Line Tower. Throughout the day I was primarily using Kodachrome 25,working with my Nikon F3T, so this hastily composed photo was no exception. I was more interested in capturing the old Baltimore & OhioColor Position Light signal than the CP Rail train about to pass it.
A Canadian Pacific SD40 (former Soo Line) receives a ‘Medium Clear’ on CSX’s old Baltimore & Ohio Chicago Terminal line at State Line Tower on the evening of January 7, 1996. Nikon F3T with a Nikkor f1.8 105mm lens; K25 slide film.
B&O’s unusual Color Position Light signals use a single-head to display all aspects. Key to interpreting the signal is the position of the white light that modifies the basic aspect. A ‘clear’ aspect is represented with two green lights in a vertical pattern (mimicking an upper quadrant semaphore) with a white light directly above them; when the white light is directly below the two greens, the aspect is ‘medium clear.’ With conventional color light signals a ‘medium clear’ may be represented with a three-head signal by red-over-green-over-red, or on a high two-head signal as red-over-green. The essential difference between ‘clear’ and ‘medium clear’ is the maximum speed allowed through an interlocking. A ‘clear’ aspect permits maximum track speed while a ‘medium clear’ limits speed typically to 30 mph. While fading light isn’t the best time to photograph moving trains, it is however a great time to photograph signals (because the signal lights appear brighter in comparison with ambient conditions). Thank you Mike!
Norfolk Southern SD70 2561 leads the westward empty Mt. Tom coal train at Hoosic Falls, New York on October 13, 2001. Exposed on Fujichrome Sensia 100 with an F3T with 24mm Nikkor lens. Shortly before the train entered the scene, a cloud diffused the sun. . . . Hey Tim, what was that you said just then?
What?
Picking photos for Tracking the Light can be a challenge. Everyday since March 2013 I’ve posted original photos to this site. That means, come rain or shine, I’ve selected photos and put words to them.
For this post, I though I’d try something a bit different. Rather than work from my semi-organized labeled material, I selected a random box of raw and unsorted slides and just plucked out a photo randomly.
While not the best picture in the box, frame 22 isn’t a bad photo.
I made it on the afternoon of October 13, 2001. Mike Gardner, Tim Doherty and I had been following an empty Mt Tom coal train since it left the plant near Northampton, Massachusetts. We caught it a multitude of locations on Guilford Rail System’s former Boston & Maine.
The last place we photographed this train was at Hoosic Falls, New York. My notes from the day read: “Hoosic Falls in a fascinating little American town—once prosperous, but on a decline . . . certainly worth some photography.”
And so there you go! Random Slide Number 22, displayed and explained.
South Eastern Pennsylvania Transportation Authority provides public transportation in the Philadelphia area and is one of the most eclectic and historically diverse transit systems in the USA. In addition to former Pennsylvania Railroad and Reading Company suburban railway services, it also operates two street car/light rail systems, several third-rail rapid transit subway/elevated services, the former Philadelphia & Western interurban third rail electric line (100 route), and myriad bus and electric (trolley) bus routes. Despite the variety of former operators, today’s SEPTA is reasonably well integrated and offers a variety of interface points between different transport modes. From my experience the transit vehicles appear clean and well maintained and the stations, many of which retain a classic appearance are also generally well appointed. The trains typically operate a regular interval service, with most heavy rail routes offering at least an hourly frequency, with express or extra services at peak times.
Over the years, my brother Sean and I have explored SEPTA as part of a greater urban experience, and I’ve gradually accumulated a considerable body of work depicting the network. SEPTA’s mix of modern and historic equipment combined with Philadelphia’s patchwork urbanity offers seemingly endless opportunities for image making.
Collected here are a few of my most recent efforts that were exposed over the last few days since the New Year. Significantly, these were largely made while using SEPTA as transport, thus integrating my photography with my transportation—an age-old tradition in urban-rail image making. I’ve found that SEPTA’s $11 Independence Pass is great value for such exercises. When possible, Sean and I will ride at the front of a vehicle, which both provides picture possibilities and allows for a better understanding of operations.
A vision of modern transit: SEPTA’s new Silverliner V at Market East Station. Lumix LX3.
SEPTA’s offices on Market Street, Philadelphia. Canon 7D w 28-135mm lens.Under and over at Norristown: on January 3, 2013 a Silverliner V running on the old Reading Company passes below the Route 100 terminus. Canon 7D with 28-135mm lens.
Wier and Schuylkill River Bridge at Norristown with Route 100 car. Nothing lasts forever, and this bridge may be reaching the end of its life.Schuylkill River Bridge at Norristown with Route 100 car. Canon 7D with 28-135mm lens.Former Pennsylvania Railroad tower at sunset; viewed from the front of an Elwyn bound train. This reminds me of Edward Hopper‘s 1929-oil painting “Railroad Sunset”, that also features a signal tower silhouette with rosy glow. Lumix LX3; set in ‘Vivid’ film mode.Train arriving at Suburban Station. Lumix LX3.Railway photography benefits from a bit of humor, don’t you think? Lumix LX3.Detailed view of a vintage Silverliner IV multiple-unit at Suburban Station. Lumix LX3.Meet on the Reading near North Philadelphia. Lumix LX3.Our SEPTA Independence Passes, which by definition offer freedom and liberty of travel! Yea! Lumix LX3.Back in the day many American towns hosted a single-track trolley line. Today, Media, Pennsylvania is one of the last such places in North America. On January 3, 2013 SEPTA’s 101 car crosses Olive Street. Lumix LX3.View from the floor of an Market-Frankford Elevated train. That’s my soiled shoe at left, suffering from a slip in the mud along the Schuylkill earlier in the day. Poor form. Lumix LX3.Market-Frankford El in the Subway at 16th and Market. Lumix LX3.
See my book Railroads of Pennsylvania for more about SEPTA, Pennsylvania Railroad, Reading Company and the history behind these operations.
Reading Terminal clock on Market Street, Philadelphia. Exposed with a Canon 7D with 28-135mm lens.
On Wednesday January 2, 2013, I revisited Philadelphia’s old Reading Terminal with my brother Sean and Michael Scherer. It was still a functioning passenger terminal when I first visited this iconic railroad facility in the late 1970s with my family. In 2007, I covered its history in my book Railroads of Pennsylvania.Here’s an excerpt of my text:
In the 1890s, Philadelphia & Reading invested its anthracite wealth in construction of one of Pennsylvania’s most ornately decorated company headquarters and passenger terminals. Facing Philadelphia’s Market Street, one of downtown’s main thoroughfares, Reading Terminal represented an ostentatious display of success, but one that now has benefited citizens and visitors to Philadelphia for more than a century.Like many large railway terminals of its time, Reading Terminal followed the architectural pattern established in Britain, perfected at London’s St. Pancras station. This pattern features two distinct structures for the head house and train shed. The Reading station architect, F. H. Kimball, designed the head house to rise nine stories above the street and its façade is made of pink and white granite, decorated with terra cotta trimmings. Behind the head house is the functional part of the station, an enormous balloon-style train shed—the last surviving North American example—designed and built by Philadelphia’s Wilson Brothers. The terminal closed as a result of consolidation of Philadelphia’s suburban services on November 6, 1984. Its modern underground replacement—SEPTA’s Market East Station—is nearby.
Philadelphia & Reading’s crown jewel was its immense, opulent railroad terminal and office building on Market Street in Philadelphia. Its corporate imperialism was spelled out in an Italian Renaissance revival style, with this corner office specially designed for the president of the company. Exposed with a Canon 7D with 28-135mm lens.Reading Terminal Market’s logo reflects that of the old Reading Company— like many coal hauling railroads symbolically used the diamond (inferring black diamonds). Exposed with a Lumix LX3.This large mural inside Reading Terminal conveys a sense of what the shed was like in the late 1930s. Exposed with a Lumix LX3.It has been nearly three decades since the last train departed the shed at Reading Terminal. Today the classic balloon shed covers part of the Pennsylvania Convention Center. Lumix LX3 photo.
Designed by Philadelphia’s Wilson Brothers and built by Charles McCall, Reading Terminal’s vast balloon shed is the last surviving example of its type in the United States.
Canon 7D with 28-135mm AF lens set at 135mm; ISO 200 f6.3 1/640 second. Image was adjusted slightly in Photoshop to increase saturation.
For several years I’ve been eyeing the view from Laurel Hill Cemetery as a place to make a railway photograph of the former Reading Company bridges over the Schuylkill. I was intrigued by combination elevation and the complexity of the scene. My brother Sean and I scoped this out last winter, but the light was dull and trees blocked the angle I wanted for a southward train. Recently the view was improved as a result of extensive tree removal around the river-side of the cemetery. Yesterday, Sean, Mike Scherer and I investigated photographic views from Laurel Hill. Our timing was right; I made this image of CSX’s symbol freight Q439 rolling across the bridge at 2:22 pm. I’m pleased with this effort, since catching a train here has been a challenge and the angle is a new one for me, yet I see room for improvement. Finding a train here an hour or two earlier in the day might offer better light on the side of the locomotives, while a slightly longer lens would tighten my composition.
Yesterday evening (January 1, 2013), on the way back from Philadelphia’s parade, I made this lone image of SEPTA’s Broad Street Subway at the Ellsworth-Federal station.
On the way back from Philadelphia’s Mummers Parade I made this lone image of SEPTA’s Broad Street Subway at the Ellsworth-Federal station. Lumix LX-3 at ISO 80 f3.2 1/13th second hand-held (with camera resting against post to minimize movement); camera set in ‘A’ (aperture priority mode) at + 1/3 (to compensate for the dark ceiling with bright lights, a situation that tends to result in underexposure).
This is a favorite photo: it appeared in Rails West 1995 (a Pacific RailNews Annual published by Pentrex Publishing), and ten years later in my book Burlington Northern Santa Fe Railway published by MBI.
Happy New Years from Tracking the Light!
July 5, 1994, was a very productive day for me; I’d been photographing from dawn to dusk in western Montana and the Idaho Panhandle. I concluded my efforts with this image at Burlington Northern’s yard along the old Great Northern main line at Whitefish. This was my first visit to the town and I arrived about an hour before sunset. I made this image in the final moments of sunlight—just after 10pm. I used my Nikon F3T fitted with an f4.0 200mm lens loaded with Kodachrome 25. I opted to silhouette the engine. This caught the sunlight through the cab, and illuminated the engineer—who appears anonymously with a halo flare around him. Although not readily visible to the naked eye, the sky was laden with particulate matter (possibly smoke from forest fires?) that made for an especially reddish effect on Kodachrome. I’m partial to the monochromatic effect of low red sun, so Kodachrome was a choice material to work with in this regard. While the film made for a deep black, it had an ability to retain detail in extreme areas of the image. Both highlight and shadows retain a high level of detail and sharpness. I find this type of image difficult to make with digital cameras. This scan was made directly from the original slide and is unmodified except for scaling. The locomotive is prominent but not overbearing. Reflective rails—shining in the light—emphasize this as a railway image while providing a natural frame; they add interest while keeping the eye from getting lost in the inky foreground. The silhouette in the cab provides a human element. The subtle detail of the trees and hills beyond the locomotive give a sense of place without offering specifics. The ability of the film to maintain a sharp edge in an extremely contrasty situation help identify the locomotive—for those who are interested—as an Electro-Motive end-cab switcher (model SW1500). The locomotive’s wheels touch the rails tie the scene together while maintaining an abstract quality. We can enjoy this image as a frame in time, although in reality it existed only for an instant.
In 2003, Irish Rail operated its sugar beet trains via Kildare because the normal routing between Waterford and Limerick Junction was closed as result of a bridge collapse at Cahir, County Tipperary. On December 6, 2003, I was in place at Cherryville Junction (where the Waterford Road joins the Cork Road—a few miles west of Kildare Station) to catch a laden sugar beet train on its way from Wellingtonbridge, County Wexford to Mallow, County Cork. (Since there is no direct chord at Cherryville to allow a movement from the Waterford Road onto the Cork Road in the down direction, this sugar beet train would continue up to Kildare where the locomotive would run around, thus allowing the train to reverse direction for its onward journey to Mallow.)
Irish Rail laden sugar beet train at Cherryville, Junction 6 December 2003.That same day, I was also fortunate to intercept locomotive 124 and a three-piece Mark3 push-pull, normally assigned to the Limerick-Limerick Junction shuttle, returning from Dublin after working a ‘relief’ from Limerick Junction.
It was a characteristically dull day. I was working with a Rollei Model T (120 size roll film fitted with a f3.5 Zeiss Tessar) and Fuji Neopan™ 400 film. Key to obtaining the desired tonality was my process. For developer I used Agfa Rodinal Special™ 1:32 with water for 7 minutes, then after dual fixing baths, Perma Wash™ for 3 minutes, and 10 minutes in running water, I toned the negatives in selenium solution (mixed 1:9 with water) for 9 minutes, then re-washed for 20 minutes in running water. (Warning: selenium is poisonous and should be handled with extreme care in a well-ventilated room). See: Installment 6: Black & White revisited; Old Tech for a New Era part 2—Secrets Revealed!.
For comparison, I’ve scanned the entire 120 size negative strip. This is in color and unmodified during scanning. The slightly purple tone is a result of the selenium toner. The two primary benefits from toning negatives with selenium solution are improved highlight density and better archival quality. While the effect is subtle, it adds snap to photographs exposed on a dull day.
Irish Rail class 141 diesels 160 and 148 lead empty beet wagons at Cherryville Junction on 6 December 2003. The train has taken the switch and is headed toward Waterford.
: In the 1990s, Santa Fe’s line through California’s Franklin Canyon featured jointed rail, searchlight block signals, and traditional code lines strung from poles along the right-of-way. The sun sets on the track at the west switch at Christie. Exposed with Nikormat FT3 and 105mm f1.8 lens on Fujichrome 100 slide film.
In the mid-1990s, I often photographed Santa Fe in the bucolic splendor of Franklin Canyon. While I made many images of Santa Fe’s trains, for me this atmospheric image captures the wonderful quality of the place and I featured it in my big book on the Burlington Northern Santa Fe Railway published by MBI Publishing in 2005. (Out of print)
Harcourt Street looking north on a rainy March 1998 evening; Nikon F3T with 50mm Nikkor Lens, Fujichrome 64T slide film. Exposed manually with aid of a Sekonic Studio Deluxe hand-held light meter. This image appears on pages 184-185 of my book Dublin, published by Compendium in 2008.
There are very few places where I my memory predates the railway. However, Dublin‘s LUAStram system (opened in 2004) offers one example. I made my first photos of Harcourt Street in March 1998. It was a rainy evening, and I was experimenting with some tungsten balanced Fujichrome to enhance the blue twilight glow.
On November 3, 2010, a LUAS Green Line Tram bound for St. Stephens Green navigates Dublin’s Harcourt Street. Canon 7D with 28-135mm lens set at 130mm, ISO 1250 1/40th sec f5.7.
Moving a dozen years forward, on November 3, 2010 I was interested in replicating the effect of my earlier efforts (without any attempt at precisely recreating the scene; my 1998 photo was made from the south-end of the street looking north, while the 2010 image was from the north-end, looking south). The image of the tram was made with my Canon 7D with the 28-135mm lens. Here, the tungsten color balance was accomplished in-camera using the ‘light bulb’ white balance setting. (See: Steam at Dusk, December 15, 2012) . This image was made during the final glow of daylight, and rather than neutralize the bluish light by using the auto white balance setting, I opted to enhance the effect while offering adequate compensation for the warm-balance street lamps. I was particularly drawn to reflections in the street and the repeating window frame patterns in the Georgian buildings above the tram. The pedestrian silhouettes seem apropos for the time of year; here past meets present.
Vermont Rail System freight 263 led by former Texas Mexican GP60 381 works on Green Mountain Railroad’s former Rutland grade near Mt Holly, Vermont on February 18, 2002. Fresh powder, a clear blue dome combined with red locomotives and tonnage make for an irresistible combination. Cross-lighting the scene adds a bit of contrast and drama. Yet the snow minimizes the effect of deep shadows. Exposing in snow takes a bit of practice. Most metering systems will tend to render the snow too dark resulting in an underexposed image. A good rule of thumb: close down one full stop from normal sunlit daylight exposure. With 100 speed slide film as used here; instead of f6.3 1/500th, I’d recommend about f9 1/500th. An advantage of working with a digital camera in snow is the ability to check exposure on site, and not have to wait until after the action has passed to find out that the photos are exposed incorrectly.
Nikon F3hp with Nikkor f2.8 180mm lens, Fujichrome Provia 100F.
Photographs from my day following Vermont Railway GP60 381 in the snow have appeared in a variety of publications. I used this image on page 35 of my 2003 book TRAINS—A Photographic Tour of American Railways, published by Gramercy. The book’s cover features a broadside view of this locomotive near Chester, Vermont.
On this Christmas Day 1982, after a ritual of opening presents, my father, Richard Jay Solomon, brought my brother and me trackside to watch trains. Before Amtrak’s eastward Lake Shore Limited passed Warren, a set of Conrail GP40-2s rolled west on what was then a double track railway. As it was a holiday, Tucker’s Hobbies (Warren’s primary attraction) was closed for business. Leica IIIA with f2.0 Summitar and Kodachrome 64 film; scan full-frame; adjusted in Photoshop to balance color and modify exposure.
Merry Christmas from Brian Solomon!
Are you enjoying Tracking the Light? Please forward a link to this site to anyone and everyone who would enjoy seeing it!
Logo of the Lockheed L-1011 TriStar (Photo credit: Wikipedia)
On Christmas Day 1979, I flew from New York’s Kennedy Airport to Mexico City on an Eastern Airlines Lockheed L-1011 Tristar. At Mexico City airport I met my uncle and we spent a week wandering around. Among our adventures was a visit to Cuernavaca where I met an elderly survivor of San Francisco’s 1906 earthquake and fire. My uncle and I rode National Railways of Mexico local train from Cuernavaca to Iguala behind an imported General Motors G16 diesel-electric. The fare was 8 pesos each—not much money, even in 1979! Throughout these wanderings I made good use of my Leica IIIA and Summitar lens. I exposed black & white and color slide film with mixed results. Despite some dodgy exposures (my light meter wasn’t the greatest) and considering I was only 13 at the time, I managed to take some memorable images.
An early morning view of National Railways of Mexico’s Cuernavaca station where I recall chickens running around on the tracks—just like in Conrail’s Palmer Yard!
SEPTA’s offices on Market Street, Philadelphia. Canon 7D w 28-135mm lens.
