It was one year ago today that Palmer Hobbies on Main Street in Palmer, Massachusetts opened for business.
The other day I stopped in to buy a magazine and I made this photograph of a steam locomotive in the store window.
That’s Main Street beyond.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Today, May 9, 2015 has been deemed ‘National Train Day’.
My participation with this event was to mark the passage of Amtrak 449, the westward Lake Shore Limited.
So, with this in mind, a little while ago I positioned myself along Route 67 east of Palmer, Massachusetts at a time-honored location along the Boston & Albany route. (Time-honored = I’ve made photos here many times before).
What I’d hoped would only take a few minutes, soon extended into an hour. So it goes when waiting for trains, even scheduled moves.
This was my first view of one of Amtrak’s new baggage cars.
Tracking the Light posts new material every day.
Don’t miss out, subscribe today!
Please share Tracking the Light.
The names and the paint have changed, but the machinery?
Back in Central Vermont days in the 1980s and early 1990s, it was common enough to see in Palmer, Massachusetts run-through Canadian National GP40-2L locomotives (some people prefer the alternate designations ‘GP40-2W,’ ‘GP40-2LW’ take your pick, I don’t mind).
Fast forward a few decades: Canadian National is no longer ‘national.’ New England Central has replaced Central Vermont, and New England Central has passed through a series of corporate ownerships. Today, the railroad is part of the Genesee & Wyoming family, making it one of more than 110 lines world wide under this orange and yellow flag.
Yet, despite all this, after more than 40 years on the move, some old former CN safety cabs GP40-2s (NECR 3015 is now listed on the cab as a GP40-2CU) still routinely work former CV rails in Palmer.
I wonder if I have photographs of these very same locomotives in Canadian National paint?
Every morning Tracking the Light posts new material.
Please share Tracking the Light!
The other day, I was on Main Street in Palmer, Massachusetts near the Day and Night Diner (where I’d just finished breakfast), when I saw an eastward CSX intermodal train approaching the Palmer diamond.
In the lead was a 4700-series SD70MAC. Since in recent times, CSX’s safety-cab General Electric locomotives have dominated the scene on the old Boston & Albany route, I was keen to make a photo of this comparatively unusual leader.
Now, I’d been away for a while, so for all I knew, the 4700s had been leading every day for the last month. Or, it may have been the first time over the line since I was here last. Hard to know, but why take a chance. Plus it was as good as excuse as I needed for a time-honored chase up the Quaboag River Valley.
But would I make it? Intermodal trains can be nimble and tend to have a high horsepower per ton rating. There’s a speed restriction across the diamond, and I thought, if I moved quickly, I might be able to zip east toward Warren for a photograph.
First I had to navigate three traffic lights in Palmer. The first two I made without problems, but the third stabbed me. Soon, I was heading out of town on Route 20, but reasons beyond my understanding, the car in front of me dawdled.
I was even with the locomotives and gaining quickly by the time I’d reached ‘Electric Light Hill’ (where the right of way of the projected Grand Trunk line to Providence was graded to cross the B&A—a point so known for the nearby electric substation opposite the tracks).
At this point, the engineer should have opened the throttle to ‘run-8’ and been charging for the grade up the valley. By rights, I would have lost the race at that stage, unless I was willing to ignore the posted limit.
As it turned out, there was no need to consider such transgression of highway safety. The eastward train had begun to slow down. I surmised that it might be stopping at CP79 for a meet with a westbound.
Kudos to the dispatcher in Selkirk! It was a very tight meet. At the field near CP79 (where the long controlled siding that began at CP83 ends), I spotted a westward train and caught a photo of it from across the freshly greened fields. Yet, my primary subject never had to stop.
This meet gave me the extra couple of minutes I needed to reach Warren with ample time to park, adjust and set my camera and compose my images.
It’s a chase I’ve done many times over the last three decades. It helps to know the railroad. All was quiet in Warren that day, save for the roar of the train.
Every morning Tracking the Light posts new material.
Please share Tracking the Light!
It was an exciting time. Mass-Central had just recently acquired a former Santa Fe CF7, which to me seemed like a really exotic locomotive, and was running excursions over the old Boston & Albany line from Ware to Palmer, and Ware to South Barre.
My friend Bob Buck of Warren got involved with publicity while I made a point of both riding some of the trains and photographing them from the ground.
This image was probably exposed on a Saturday afternoon in late September or early October. I’m not sure of the exact date because the individual negative strip has been separated from its original sleeve and my notes from the time are a bit minimal (and filed about 4,000 miles away). However judging by the foliage on the trees, it wasn’t too late in the season.
I’d followed the train down from Ware. It made a spirited run and approached each crossing with the bell ringing and horn blaring. Here a man has jumped off the engine to flag the difficult Route 181 crossing in Palmer, Massachusetts, where the tracks cut across the road at a difficult angle.
I’ve always liked this location because the line angles toward the road down a gently curving ramp with a row of trees beyond that makes the whole scene seem like a big diorama.
Back then, my photography was entirely inspired by the spirit of the moment and I didn’t put a lot of forethought into details such as location, lighting and composition. My mode was to ‘get ahead of the train then jump out and grab a photo or two.’
Tracking the Light posts new material every morning.
Please share Tracking the Light!
In response to my recent nomination by Phil Brahms and Blair Kooistra for the Facebook Night Photo challenge, I’ve selected five groups of photos that I feel might be interesting to review on Tracking the Light.
I have to admit, I’m not clear on the rules for this challenge. As a result, I’ll follow my standard policy and just wing it. Who needs rules anyway?
Among the difficulties in selecting photos for this challenge has been simply finding them. For the most part I’ve not organized images in regards to the time of day they were exposed. A related problem is the large number of night views that I’ve attempted over the years.
Lastly, what makes for a successful night photo?
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Brian’s Review, Part 2.
It isn’t fair to judge a new camera after only a few hours of working with it. I find that it takes a while to get used to any new equipment.
In April 1990, I was given the loan of a Nikon F3 SLR. After a month of putting it through its paces, I knew I had to have one. Yet, I wasn’t fully comfortable with the camera for at least 6 months.
As mentioned in the previous post, last week Eric Rosenthal loaned me a brand new LX100. So I brought it out for some tests.
I found this to be a very powerful tool. It looks and feels much like a traditional rangefinder, yet has many electronic features.
While making a basic photo with the LX100 is straight forward, the camera’s multitude of buttons, dials and layers of menus needed to access the camera’s various modes, color profiles, filters, and features, plus video and panoramic options isn’t intuitive. In fact it’s intimidating.
To really give the LX100 a fair treatment, I’d need several weeks to properly figure it out and become comfortable with its operation.
However, I was able to make a variety of interesting photographs of which a few are presented here. Other than scaling the Jpgs, I’ve not altered the images in post processing in regards to color, contrast, gamma, or other visual effects.
So is the LX100 a good camera for railway photography?
If you desire the ability to manually control a digital camera, and prefer traditional dials over toggle switches, along with a built in view finder in addition to a rear screen, the LX100 is a great option.
The camera reacts quickly. It has a ‘burst’ feature that allows you to take three images in rapid succession. It can make RAW and JPG file simultaneously. The lens is fantastic and the sensor is amazing, so the images are exceptionally sharp.
On the downside, it uses a fixed lens that is limited to a 24-75mm range (in traditional 35mm film camera terms). Its menu navigation is counter-intuitive. For a small camera it is pretty heavy. And, it’s relatively expensive, B&H Photo in New York advertises it for nearly $900, which is three-times what I paid for my LX7 a few months ago.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Tomorrow: sharpness and clarity too much? No problem! The LX100 has an easy solution for that too.
Experimenting with a New Digital Camera.
What can I do with it? How comfortable is it to use? How do the photos look?These are some of the questions that I have of any new Camera. The LX100 has been eagerly awaited and only recently released.
Last week Eric Rosenthal, my digital photography guru and new equipment advisor, lent me a brand new Lumix LX100 to play with. Unfortunately, I’m facing a series of tight deadlines, so I really only had a few hours to put the camera through its paces.
This wasn’t enough time with the LX100, and I could have spent days working with it! The LX100 is a versatile piece of equipment with lots of features, so I had only begun to play with it when it was time to get back to work.
As regular followers of Tracking the Light are aware, for nearly five years I’d worked with a Panasonic Lumix LX3 (among other cameras). In May I sampled the newer LX7 and in June I bought one. The LX3 was a great camera (I exposed more than 64,000 images with it, before the LX3 expired following a series of mishaps), and the LX7 is a worthy successor. (I’ve never seen an LX5, which was briefly offered as the replacement for the LX3).
The LX100, while kin to the earlier Panasonic Lumix LX cameras, is a different machine. It is not only more advanced, but it is better built, it features a heavier body, a larger lens (more glass) and a more modern sensor, and so in the hand it feels more like a traditional rangefinder camera.
What I liked the most about the LX100:
1) It has a built-in viewfinder, so unlike the earlier LX-series cameras you need not rely on the rear display screen to compose photos. The viewfinder comes on when you put your eye to it. It has a diopter, so you can adjust it to suit your vision (I wear glasses and for me this is an important feature). The viewfinder is especially valuable for composing photos of moving trains in daylight.
2) The LX100 uses traditional rings and dials, which allow you to set the aperture, shutter speed, focus and zoom-lens manually. While you can manipulate these settings by navigating the camera’s menus, for the most part you don’t need to. This makes it work more like a traditional camera. Again, for making railway photos this is important to me because I can make adjustments quickly and intuitively without having to stare at the display screen in bright daylight and/or when your subject is rapidly rolling into view.
3) Like the LX3 and LX7, it has the option of making both RAW and JPG files simultaneously, which in my mind makes this a tool for making publication quality images.
4) It has an outstanding Leica lens which allows for very sharp images, and at f1.7 allows lots of light, which again is important for making railway images, especially in low-light situations, and allows for shallow depth of field, when that is desirable. Also, the lens stops down to f16, which gives it greater versatility.
5) The LX100 uses a sensor that is larger and more advanced than that on the LX7, and this allows for higher quality images while is specifically designed to make more effective use of the camera’s built-in aspect ratios (the dimensions of the image frame). Like the LX7, it has a switch to select the following standard aspect ratios: 1:1 (square), 4:3, 3:2, and 16:9. I found the average RAW file was about 16.5 MB. (I’ve discussed this feature in previous posts).
But how do the images look? Below are a few rough comparison images made using the LX100 and my LX7. All images were made hand-held. I did my best to approximate the focal length of the lens, and to use comparable shutter/aperture settings. These images are from the in-camera Jpgs and now the RAW files (which are substantially larger). I did not post-process the images or alter them for color balance, sharpness, contrast, or cropping. But I did scale them for internet presentation.
However, WordPress, which is how Tracking the Light is presented, tends to compress images and I find that they never look as good on this site as they do directly on my computer screen. So take that into consideration.
For the most part, I was trying to match the camera’s output as closely as possible for the sake of appearance. I set both cameras at their respective ‘Standard’ color profiles. (Both cameras have several color profiles to select).
Since the LX100’s lowest ISO is 200, and the LX7’s is 80, this presented a bit of a quandry. If I set both cameras at 200, the LX7 images would have a quality disadvantage, while if I set the LX7 at 80, I would need to use a slower shutter speed or a smaller f stop to make an equivalent exposure. (The caveat is that the LX100 is a more versatile camera by virtue of its superior sensor. Simply, it can do more because it has greater range.)
The LX100 has a multitude of features, modes, filters and etc, which I’ll discuss in a follow up post.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
CSX at Sunrise, Palmer, Massachusetts.
Working with my old Leica 3A —a camera I’ve been using on and off for some thirty-odd years—I made this image of CSX’s westward Q293 at Palmer, Massachusetts on the morning of October 5, 2011.
My lens of choice was a 21mm Super Angulon, which tends to vignette a little in the corners. I processed the film using my customized chemical formula that makes the negatives easy to scan. This image received virtually no post-processing after scanning, except to remove a few dust specs and to scale for internet presentation.
Sometimes the old cameras yield the most satisfying results. Some of my earliest photos were made with this same camera-lens combination.
Tracking the Light presents: Palmer, Massachusetts February 24, 1988.
In keeping with the spirit of Otto Vondrak’s Facebook challenge, I’ve dug into my scanned black & white negative file and found this old black & white photograph from the days or yore.
I exposed this using my father’s Rolleiflex Model T that was fitted with a ‘super slide’ 645 insert. I processed the film in Kodak D76 at the Rochester Institute of technology. Back in 1988, I made prints from the negative back, but the full-frame image presented here is from a scan of the negative made in more recent times.
Tracking the Light post new material daily!
Spread the word and share this post.
October 18, 2014.
We had a late start, the weather was a bit iffy, and there wasn’t much running, but my father and I set out anyway to make a few railroad photos in the fall foliage.
Since Amtrak’s Vermonter is in its final months of using the New England Central route between Palmer and East Northfield, Massachusetts, we made a point to intercept it in both directions.
A stop by Pan Am’s East Deerfield Yard found little moving except the hump engine.
Not everyday is busy in central Massachusetts, but I can always find photographs. Here’s just a few from our afternoon’s exploration.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Looking Toward Winter.
As the warmer greener season (some call it ‘summer’) fades, I thought it would be time for a reminder of the colder whiter months coming.
On February 8, 2011, I exposed this snowy photo at my all-too-familiar location at CP83 in Palmer, Massachusetts.
Not a wheel turning but plenty of snow; even the popular Steaming Tender restaurant was closed at that moment.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Palmer, Massachusetts.
Twenty-eight years ago I made this photo. It was the day after Conrail began single-tracking the Boston & Albany route. On July 21, 1986, track forces had cut in CP83 at Palmer, and CP92 in Springfield, removing the old number 1 (westward) track from service.
The remains of the second diamond crossing with Central Vermont are in the foreground. A westward empty autorack is taking the new switch at CP83 in front of the Palmer Union Station.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Palmer to South Barre, Massachusetts.
Trying to see the railroad differently; I’ve been photographing the former Boston & Albany Ware River branch for more than 30 years, so finding new angles is a bit of a challenge.
On July 10, 2014, I met Mike Gardner, Paul Goewey and Brian Jennison in Palmer with the expressed goal of following Mass-Central’s daily freight northbound.
It was a bright morning following a night of heavy rain and mist still clung to the valleys. Mass-Central was working with GP38 1751, one of two locomotives acquired last year and custom painted into a variation of the 1950s-era Boston & Maine ‘Bluebird’ livery.
After the train passed Thorndike, (a few miles from Palmer yard), it slowed to a craw then stopped unexpectedly. Trees had fallen on the line. This delayed it while crews cut the trees with chain saws. In the mean time, Paul showed me an angle near Forest Lake that I’d never seen before.
Track speed on the line is a casual 10 mph. The trick isn’t trying to keep up with the train, it’s trying to stay focused on the subject. In addition to the slow running, Mass-Central spends a lot of time switching freight cars, and often in places that aren’t conducive to summer-time photography.
South Barre is as far as the Mass-Central goes. Beyond that the old B&A branch is abandoned. Having done well with the northward run, we opted for lunch, then moved on to other lines.
I worked with three cameras; my Lumix LX7 and Canon 7D, plus my old Rolleiflex Model T. (This isn’t the same old Rollei, that I used back in the 1980s, but one similar to it.) Unfortunately, it wasn’t functioning perfectly in the morning, and I missed a few photos before I got it working. Now, to process the film!
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
Palmer, Massachusetts, June 22, 2014.
A wise photographer once wrote, ‘The secret to making photographs is f8 and be there.’
Back in the 1990s, my friend and fellow photographer Mike Gardner said, ‘All good trips begin and end in Palmer.’
Sunday, June 22, 2014 confirmed Mike’s wisdom. I’d headed to Palmer to meet my frient Tim Doherty. Before leaving the house, I searched in vain for my scanner, but departed without it. I was coasting on intuition.
Moments after stepping out of the car at CP83 in Palmer (where CSX crosses New England Central) to say ‘hello’ to Tim, I heard, above the dull roar of road traffic, the distinct sounds of eastbound train’s dynamic brakes.
I said to Tim, ‘There’s an eastbound train, and it’s very close.’ I flicked on the Lumix LX7 that was hanging around my neck and stepped promptly toward my preferred trackside location at CP83. As I did, I heard the lead axles of a six-motor GE rattling across the New England Central diamond a few hundred feet to my west.
I had just enough time to set the exposure and frame up a nice view of CSX Q012 passing CP83’s signals with the old Palmer Union Station (now the Steaming Tender Restaurant) to the left of the old Boston & Albany mainline.
There’s a 30 mph speed restriction on the diamond for freight. As the train rolled through, I said, ‘we can catch this again.’ And, off we went on the first of a long-day’s railway photography adventures.
Nearly 12 hours later, we returned to Palmer and, as it turned out, repeated the exercise in fortuity. Immediately upon our arrival, the signals lit at CP83 and these soon cleared to green on the main track. ‘We’ve got a westbound, and it can’t be far off.’
I knew this because CSX’s signals at CP83 are approach-lit, and only light when something has actuated the track circuits between CP83 and CP79 (located at the east-end of the controlled siding). Also, when a signal has been cleared, a train must close.
Again, we had just enough time to get in position for photography.
Walking toward the diamond, some diners leaving the Steaming Tender asked me, ‘Is a train coming?’
Not having time to waste more than a moment in conversation, I replied, ‘Yes, a westbound is very close. Less than four minutes away.’ A headlight appeared to the east as I made the comment.
“How did you know that?” The diners asked, as if I possessed some blind precognition. “The signal shows ‘clear’ for the main track,” was my honest reply, but I may as well answered in ancient Greek.
My luck?—Being in the right place at the precisely the right times. However, I made my own luck. By keeping my ears open and my eyes on the signals, I knew to act quickly. Stop, look and listen, right? There’s no mystery there.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
A view inside.
Proprietor of Palmer Hobbies, Bill Lanza, has opened his doors!
Come in and have a look around!
Palmer Hobbies features a variety of model railway products, magazines, and, of course, railroad books!
Patrons of the old Tucker’s Hobbies (formerly Tucker’s Hardware) in nearby Warren, Massachusetts will find familiar faces.
The new store is easy to find. It’s located at 1428 Main Street in Palmer, Massachusetts. Take the Massachusetts Turnpike to Palmer, turn right and drive toward Depot Village. The shop is located in the center at the lights near the Hess Station and across from the CVS drug store.
Palmer Hobbies is near the famous Palmer Diamond, where New England Central’s former Central Vermont crosses CSXT’s Boston & Albany route. It’s across the tracks from the popular Steaming Tender restaurant (near CP 83).
Phone: 413-436-5318. Open Tuesday to Saturday. (Closed on Sunday and Monday).
For Streamliner photos, click here for Tracking the Light’s Streamliners at Spencer page.
Tracking the Light posts new material every morning.
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
June 5, 2014, Page 2.
One of my photographs is featured today in the Palmer, Massachusetts Journal Register.
For Streamliners photos, click on Tracking the Light’s Streamliners at Spencer page.
Tracking the Light posts new material every day!
Please share Tracking the Light!
http://briansolomon.com/trackingthelight/
May 24, 2014.
Last month (April 2104), my Panasonic Lumix LX-3 began performing erratically while I was photographing Irish Rail at Monasterevin.
Although annoying, this was only a minor setback of the day, because I had my Canon EOS 7D with me. I often travel with at least two cameras, just in case one develops problems.
The LX-3 suddenly suffered an electrical fault; specifically the rear display stopped working reliably. Sometimes it would flicker on, other times it was dark. I tried all the usual cures; I turned the camera off and then on, I removed the battery, I even tried the factory reset. No joy.
In the short term I found that if I pressed on the side of the camera body, the display would come on long enough to make adjustments. I continued to use the LX-3 for secondary services, while relying on the Canon EOS 7D and film cameras for more critical work.
I’ve had my LX-3 for almost five years and in that time I’ve carried it with me everywhere. It’s visited about a dozen countries, and more than a dozen US states. In addition to pictorial service, I’ve used it intensively to copy documents while in libraries. Using the in-camera file counter, I determined that I released the shutter more than 64,000 times.
Last November the camera took a very hard knock, which didn’t immediately affect its performance, but certainly didn’t do it any good. In April, the camera was subject to unusual dampness (it got wet) while I was making night shots in Porto, Portugal.
On May 24, 2014, my father lent me his Panasonic LX-7 to see if this newer Lumix model would offer a suitable replacement. This camera comes highly recommended to me by several people. Since it’s essentially the latest model kin to my LX-3, it may represent an ideal choice for my new ‘everywhere camera’.
I brought it to Palmer, Massachusetts where I exposed about 100 images in various conditions, both to get a feel for the cameras controls (which have several notable differences from the LX-3), and examine the quality of the images.
I found that the LX-7 had several positive points. In general it reacted quicker and cycled faster than the LX3. Its zoom lens has a wider range, and offers longer telephoto photo settings. The rear display seemed sharper and brighter.
On the downside, I was unfamiliar with the controls, so setting the camera proved challenging. Also, the camera is slightly larger.
In general I was happy with my results, and plan to experiment a bit more with the camera before I commit to buying one. There are a variety of excellent small cameras on the market these days, so I may wish to sample some of these too. More to come!
Tracking the Light posts new material every morning.
Please share Tracking the Light with everyone who may enjoy it!
http://briansolomon.com/trackingthelight/
February 24, 2010.
I’d called up to Tucker’s Hobbies at closing time. Bob Buck met me at the door. “The CSX Business train passed Worcester westbound more than 20 minutes ago!”
We made a hasty departure for Palmer. And halfway down the Quaboag River Valley between West Warren and Palmer, I hear CSX’s dragging equipment detector at West Warren report, ‘no defects’.
“It’s about 3 minutes behind us,” I said, as I accelerated the car.
We pulled into the yard at Palmer, near the site of the old freight house. It was wet, the light was fading. I prepped my Lumix as the train came into view, and popped off a few pan photos as it raced west. Bob was delighted! I made a few prints for him.
Tracking the Light posts new material every morning.
Please share Tracking the Light with everyone who may enjoy it!
http://briansolomon.com/trackingthelight/
25 Years Ago, Conrail Demolished Palmer’s Boston & Albany Freight House.
During the 1980s, Conrail demolished many disused structures along the Boston & Albany line. The East Brookfield freight house went in 1984, Worcester’s went in 1986. In January 1989, I noticed that the railroad was preparing to erase Palmer’s B&A landmark.
The wrecking machine was parked out in front and had already taken a bite out of the northeast corner of the steam-era red brick structure.
I proposed a short article to the editor of Palmer Journal Register. The newspaper supplied me with a roll of black & white film and processed it for me. I photographed the building from every angle and wrote the article that appeared about a week later.
Conrail made short work of the old building, which had stood at the west-end of the yard near Haley’s Grain Store. Today there is almost no evidence of the building.
For me it had been tangible evidence of the old Boston & Albany—never mind Conrail or Penn-Central. While its usefulness to Conrail may have ended, I recalled speaking with the agent there on various occasions in previous years.
I still have the negatives that I exposed with my Leica M2 and I’ve scanned these using my Epson V600.
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Tomorrow: Tracking the Light takes a look a classic searchlight signal on Pan Am Southern’s Boston & Maine route.
“It never gets old”
Amtrak 449, in sun and rain; one day and the next. Last week, I was over in East Brookfield visiting the LeBeaus to do some videography for a music video. Dennis LeBeau lives a block from the Boston & Albany (CSXT’s Boston Line).
I said to Dennis, “I’m just going to nip down to the bridge to catch 449. It should be getting close.”
“Passes here every day at one-thirty. I’ll join you in a minute.”
I phoned Amtrak’s Julie (the automated agent: 1-800-USA-RAIL) to find out if 449 as on time out of Worcester. As it turns out, it departed Worcester Union Station 4 minutes late.
Worcester is at CP45, East Brookfield is CP64. It takes 449 about 25-30 minutes to run the 19 miles.
Since it was nice bright afternoon, I opted for a broadside view that shows a few of the houses in town. At 1:39, Dennis shouted to me from the road bridge, “He’s around the bend.” I was poised to made my photograph with my Lumix LX3.
This can be tricky since there’s really only a split second to get the train in the right place. If the camera isn’t cued up, all I’ll get is a photo of the baggage car. But I was ready, and put the train precisely where I wanted it.
The train glided through town. I turned to make a few going away views with my Canon, and said to Dennis, “You know that never gets old. I’ve been photographing that train since the 1970s.”
Dennis said to me, “I’ve been watching it since it was the New England States Limited, with New York Central E8s!”
A day later, I was in Palmer (CP83). The word was out that Amtrak 145 (one of the Genesis P42s in heritage paint) was working 449. The weather was foul, but since I was in town anyway, I figured I’d give the train a roll by.
It was stabbed at CP83 by a southward New England Central freight going into the yard, which allowed ample time for photos. Such a contrast in days. Pity the heritage P42 hadn’t worked west a day sooner.
See: Kid with a Camera 1978; Amtrak’s Lake Shore Limited catches the glint at Palmer, May 28, 1986.
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Amtrak 449, the Lake Shore Limited with E8As near Palmer.
For my eleventh birthday my father gave me a 1930s-era Leica 3A and a role of film (with more to follow).
Every so often Pop would gather my brother Sean and I into the car and head over the Boston & Albany (then Conrail) to wait for Amtrak’s Lake Shore Limited. Back then, the train was still running with heritage equipment and typically hauled by fairly tired E8As.
If we were really lucky we might catch freight too.
On this day in summer 1978, we drove to Palmer. I think we’d started up the Quaboag River Valley, but realized we might not have time to reach Warren before the westward Lake Shore came roaring down the valley. So we reversed and picked a spot near milepost 81, not far from the Route 20-67 split (east of town).
We didn’t wait long. I could hear pairs of twin 12-567s working before the headlight a appeared at the bend near the old barn. And then there it was!
“I see it!”
I made several exposures with the Leica. Unfortunately, in my panic to capture the train passing I shook the camera, so the head-on view is a bit blurred.
I processed the negatives from this adventure in the kitchen sink and made prints that I placed in a homemade photo album. The negatives were well processed and have survived in good order. I scanned them a few weeks ago. My notes from the day appear to have gone missing though.
Click to see:
Kid with a Camera: Gun Hill Road, the Bronx, New York Summer 1980
Kid with a Camera, Framingham, Massachusetts, 1982.
Amtrak’s Lake Shore Limited catches the glint at Palmer, May 28, 1986.
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Tracking the Light in 2013.
Here, a potpourri of images illuminated the net; covering everything from unit oil trains to obscure eastern European transit. So, looking back, 2013 has been a productive and busy time for Tracking the Light.
My original intention with Tracking the Light was to disseminate detailed information about railway photographic technique. Over time this concept has evolved and I’ve used this as a venue for many of my tens of thousands of images.
Among the themes of the images I post; signaling, EMD 20-cylinder diesels, Irish Railways, photos made in tricky (difficult) lighting, elusive trains, weedy tracks and steam locomotives are my favorites.
Since March, I’ve posted new material daily. I’ve tried to vary the posts while largely sticking to the essential theme of railway images. I hope you’ve enjoyed the posts and will tell your friends about this site! There’s more to come in 2014!
Happy New Year!
Brian Solomon
See: Burlington Northern at Sunset, Whitefish, Montana July 5, 1994; Tram in Olomouc, Czech Republic, 2008; Donner Pass Part 1; Bluebell Railway Revisited, July 2013-Part 2; Boston & Albany Milepost 67, Brookfield, Massachusetts; Irish Rail, Wellingtonbridge, County Wexford, December 2005 . . .and more!
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Conrail’s GE C30-7As catch the Glint.
In early summer 1986, Conrail was weeks away from converting the Boston & Albany route from a traditional directional double track mainline to a single-track line under the control of CTC-style signals with cab-signal. The first section to be cut-over to the new control system was between Palmer to Springfield, Massachusetts.
Among the results of this change was the abandonment and eventual lifting of the old westward main train west of Palmer.
I was well aware of this pending change and had been documenting Conrail’s work in the area over the preceding months.
On the evening of June 17, 1986, I focused on the westward main track at the Quaboag River bridge just west of the Palmer diamond as Conrail’s eastward SEBO-B dropped down the short grade toward the Palmer yard.
While the train adds interest to the scene; my main focus was the track in the foreground that would soon be gone. I made a variety of images in this area on the weeks up to Conrail’s cut-over day.
Photographing directly into the clear summer sun produced a painterly abstraction. I’ve allowed some flare to hit the camera’s lens which obscures shadow detail and makes for a dream-like quality.
Years after I exposed this frame, I moved to California where I met photographers that had perfected this photographic technique. Interestingly, railroad photographers had been using backlighting to good advantage for a long time. In searching through archives I’ve come across fine examples of Fred Jukes’ and Otto Perry’s works with similar backlighting effects.
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
November Moonlight.
Last Friday evening, November 16, 2013, I stopped by New England Central in Palmer, Massachusetts on my way to meet friends for dinner.
The moon was nearly full and a venerable GP38 was resting in the yard. Here was an opportunity for a photograph (or two)!
I’ve made numerous images of New England Central 3855, since this locomotive arrived with the creation of the railroad nearly 19 years ago. So why bother make more, especially on a chilly November evening?
My short answer: because it was there to photograph.
The long answer: the moon was out casting a surreal glow across the Palmer yard and the mix of moonlight and sodium vapor street lights inspired me to expose some long time exposures.
I positioned my Lumix LX3 on my large Bogen tripod and manually set the camera. I carefully avoided direct light by using tree branches and nearby buildings as natural lens shades. I also minimize the effect of street lamps in the photograph, while aiming skyward to catch the twinkle of evening stars. (On the full-sized un-scaled RAW file, the stars are very clear in the sky. Unfortunately the scaled and compressed images do not translate as well as I’d hoped.)
Using long exposures require a very steady tripod. Also to minimize noise I selected the lowest ISO value. For more on my ambient light night photo technique see earlier posts including: Friday Night in Palmer, Massachusetts, July 12, 2013; and Lumix LX-3—part 2: Existing Light Digital Night Shots
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
A Pair of Pumpkins on the Move.
Genesee & Wyoming acquired Rail America some months back and so now New England Central is one of the many G&W family railroads.
While several locomotives have been painted in the new corporate colors (or rather, G&W’s traditional paint scheme), many of New England Central’s locomotives remain in various former liveries, including the railroad’s original blue and yellow.
On Monday October 28, 2013, New England Central job 610 (a turn that runs from Willimantic, Connecticut to Palmer, Massachusetts) sported a pair of nicely painted G&W locomotives.
My dad and I made chase of this train on its southward run. I exposed digital still photographs, while Pop made some video clips with his Lumix LX7.
The sun was playing tag with us, but the locomotives were so bright and clean it hardly mattered if the sun was out or not.
See yesterday’s post: New England Central at Eagleville Dam, Connecticut
Also check out previous posts: Genesee & Wyoming at P&L Junction, November 4, 1987; Two Freights 24 Hours Apart, Seeking the Elusive Orange Engine(s); New England Central at Stafford Springs, Connecticut on May 21, 2013, and New England Central at Millers Falls, Massachusetts, December 9, 2012.
Tracking the Light posts new material daily.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Related articles
Classic Locomotives at Scenic Spot.
In recent months, New England Central’s operations have been altered. This has benefits for photography. Since the times trains tend to run have changed, different locations have opened up for photographic possibilities.
For many years, New England Central operated a southward freight from Palmer, Massachusetts in the early morning (typically as job 608), this worked into Connecticut (to Willimantic and beyond) and returned in the afternoon or early evening.
Now, on many days, the railroad runs a turn from Willimantic to Palmer (often as job 610), that goes on duty at Willimantic in the morning, runs northward to Palmer, and returns. From my experience the return times vary considerably.
Once I was aware of this change, I began thinking about various places to make photographs based on afternoon lighting angles. Last week, I heard 610 working south from Palmer. I was in luck as a pair of vintage GP38s in the railroad’s original scheme (the locomotives were painted by Conrail in preparation for New England Central’s February 1995 start up).
Track speeds south of Palmer make following a train easy enough. My first location was Stafford Springs, where I’ve often exposed photographs of New England Central. From there I followed southward.
My final location of the day was at the Connecticut Eagleville Preserve, where the line passes an old Mill dam (I’m not well versed on the specific history of this dam, but the arrangement is common enough in New England, where in the 19th century water powered local industries. For more information on the park and area see: http://www.willimanticriver.org/recreation/pg_park_eagleville-preserve.html).
Afternoon sun favors this location, and I made the most of the light, waterfall and autumn foliage as well as the GP38s.
Tracking the Light posts new material daily.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
A Clear Autumn Day to Photograph a Shiny Blue Bird.
Today, Massachusetts Central assigned one of two recently acquired GP38s to its weekday Palmer-South Barre local freight. Although Mass-Central received the two locomotives earlier this year, it is my understanding that today’s train is the first regular revenue service run to use one.
The train departed Palmer this morning with the GP38 leading Mass-Central’s 2100 and 960. The second two locomotives were left in Ware, while the freight continued up the Ware River Valley on the former Boston & Albany branch.
Both of the Massachusetts Central’s GP38s have been beautifully painted in a livery inspired by the classic Boston & Maine ‘Blue Bird’ scheme. Although most of Mass-Central’s current route uses former Boston & Albany tracks, the railroad began as a switching operation on vestiges of Boston & Maine’s Central Massachusetts line around Ware.
Historically, the Central Massachusetts was a Boston & Maine route between Boston and Northampton, although it hasn’t served as a through route since the 1930s. Massachusetts Central still operates a few segments of old B&M trackage, notably in Ware.
For today’s regularly scheduled post see: Hot Spot: Palmer, Massachusetts, October 17, 2013
Tracking the Light posts new material daily.
See my Dublin Page for images of Dublin’s Open House Event in October 2013.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Trains Converge on Palmer; 2 Hours of Non-stop Action.
In the 1980s, Trains Magazine occasionally ran articles that featured ‘hot spots’ illustrated by sequences of photos showing different trains passing the same place over the course of hours.
These always caught my attention. While the individual images ranged from pedestrian to interpretive, the collective effect produced an understanding of how a busy spot worked.
Trains tend to arrive in clusters. Hours may pass where nothing goes by except a track car, then trains arrive from every direction. The astute photographer has learned when to make the most of these situations.
Palmer, Massachusetts can be a busy place, if you’re there at the right time. CSX’s east-west former Boston & Albany mainline crosses New England Central’s (NECR) former Central Vermont line at grade. An interchange track connects the two routes and serves as connection to the former B&A Ware River Branch operated by Massachusetts Central.
Afternoon tends to be busy. Among the moves through Palmer are Amtrak’s Vermonters that use CSX’s line between Springfield and Palmer, and NECR’s line north of Palmer toward Vermont. There isn’t a direct connection to allow an eastward train on the CSX route to directly access the NECR’s line.
To compensate for this, Amtrak’s trains must use CSX’s controlled siding to access the interchange track, and this to reach the NECR. This requires trains to reverse direction. As a result, Amtrak trains either have locomotives on each end or run with a push-pull cab control car.
On the afternoon of October 17, 2013, the interchange track proved one of the busiest lines in Palmer and was used by a succession of NECR, Mass-Central, and Amtrak trains.
Complicating matters was Amtrak 57 (southward Vermonter) which was running more than an hour behind its scheduled time, and so met its northward counterpart at Palmer. New England Central was also busy with no less than three trains working around Palmer about the same time.
I’ve put the following photos in sequence with the approximate times of exposure. I stress ‘approximate’, since my digital camera’s clocks not only didn’t agree on the minutes passed the hour, but were set for different time zones as a function of recent travel.
It was a nice bright day too. Patrons at Palmer’s ever popular Steaming Tender restaurant (located in the restored former Palmer Union Station) were entertained with a succession of trains passing on both sides of the building.
Not bad for one afternoon! Yet, not a CSX train in sight. These days much of CSX’s business passes Palmer in darkness.
Tracking the Light posts new material daily.
See my Dublin Page for images of Dublin’s Open House Event in October 2013.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Kid with a Camera.
In spring 1979, my dad and I visited Central Vermont’s Palmer, Massachusetts yard. At the time Palmer activity tended to be nocturnal. A lone RS-11 for The Rocket (Palmer-St Albans, Vermont piggyback) was the only locomotive in town.
I made a few exposures on Kodachrome 64 with my Leica 3A. At the time I was in 7th grade at Monson Junior-Senior High School. Admittedly my photographic skills were rudimentary. The photos are passable, but a decent record of the scene.
I wish I’d made more photos of CV’s piggyback trains. By the time I understood what it was about, it had stopped running. I have a few images of The Rocket on the road, but not very many.
Difference of Decades
About four miles east of the center of Palmer (Depot Village) CSX’s former Boston & Albany mainline passes a bucolic setting at the bottom of a broad sweeping field as it heads up the Quaboag River Valley. This is best viewed from Route 67, not far east of the split with Route 20.
One summer’s evening more than 30 years ago, my father and I stood out in the field to make a photo of Amtrak’s westward Lake Shore Limited (train 449). Since that time I’ve returned many times to photograph trains.
I’ve paired two sets of images here. The black & white photograph was made on March 15, 1986 (‘Beware the Ides of March!’). The color images I exposed a week ago Sunday (July 14, 2013).
Among the changes to the scene over the years has been an increase in undergrowth. A more dramatic change was the recent installation of a voltaic farm (solar panels) on the northside of the field. This alteration has greatly changed the character of the place.
According to an article in a recent Palmer Journal Register, perimeter fencing may soon encircle the voltaic farm. Undoubtedly this progress will further improve the photographs made here beyond all previous measures of aethetic virtue.
Another Train Intensive Evening
Friday evening July 12, 2013 represented my latest opportunity to watch and photography trains after sundown as this familiar location. In previous posts I’ve outlined my connections to Palmer (see: Palmer, Massachusetts, Friday Night, June 28, 2013, also Foggy Night in Palmer 28 Years Ago . . ., and Drowning the Light.
Although Palmer is a relatively small town, it has long been the focus of railway activity. Today, it hosts yards for both New England Central and CSX, as well as nominal terminal facilities for Mass-Central.
CSX has a four-mile dispatchers controlled siding the runs from CP79 to CP83 (the numbers are based loosely interpret mileage from South Station, Boston). Just past the west switch at CP83 is the level crossing with New England Central—colloquially known as the Palmer Diamond. The popular Steaming Tender restaurant occupies the old Union Station between the two lines.
After 10pm, trains converged on CP83. A CSX westbound on the main track met an eastward freight running via the controlled siding, as New England Central’s northward job 606 was looking to cross CSX to double its train together before heading toward Vermont.
The awkward nature of the former Central Vermont yard at Palmer complicates operations over the CSX diamond. Not only is the yard too short to hold long trains, but the yard was built on a grade which crests at the CSX (former Boston & Albany crossing).
Challenges for railroaders produce opportunities for photography, especially in the evening hours. As the railroads weaved their trains through Palmer, I made a series of photos.
However, time was catching me up: I’d had a long day and by 11pm, I needed a bit of that elusive commodity—sleep. As Bob Buck would have said, I was the ‘hero’, and departed as more trains were focused on Palmer. The approach lit signals at CP83 were still lit when I hit the road. The regular gang can report on what I missed!
Tracking the Light’s first full year.
It was exactly one year ago (July 19, 2012) that Tracking the Light made its debut.
In the last year this site has had nearly 24,000 visits.
Of the nearly 235 posts, the following topics have been the most popular:
1) Gallery Post 1: Sperry Train at Islandbridge Junction on August 30, 2012
2) LUAS Tram Crash on Benburb, Street Dublin September 10, 2012
3) Installment 1: Central Vermont Railway at Windsor, Vermont
4) Gallery Post 2: Looking Back on Irish Railways 1998-2003
5) Tracking the Light Extra! Breaking Views!
Among the posts that drew the least interest:
1) Sunset at Bonn, Germany, August 1998
2) Chicago & North Western Station, Chicago August 1984
As a result of my careful marketing analysis, I’ve determine the best ways for Tracking the Light to go viral are:
1) Encourage Sperry to plan a safely staged ‘derailment’ on Dublin’s LUAS route (to demonstrate the dangers of hidden rail fractures, perhaps) using former a Central Vermont Railway switcher painted in Irish Rail grey and then photograph it on a dull day using my Lumix LX-3. (Along the lines of the theatrically arranged ‘cornfield meets’ of the late Victorian era.)
2) Hire a Korean guy with sunglasses to dance around near the tracks. (Gangnam Style) —hey, with more than 1.5 Billion hits, something must be working, right??
3) Offer free Twinkies to all Tracking the Light subscribers.
4) Plan a merger with LeakyWiks.
5) Encourage everyone who enjoys the site to spread the word (and links) with their friends and urge regular visitors to subscribe! (there’s a box for comments toward the bottom of the posts and a box to tick that enables the subscription feature—admittedly this is a bit Kafkaesque, and hopefully I’ll find a better means of enabling subscriptions soon!)
Incidentally, my elaborate plans to import a German electric for demonstration were to be aborted, unfortunately Amtrak didn’t get the memo! 😉
Thanks again for checking Tracking the Light!
Brian Solomon
My Rare Photo of a CV Switcher.
The other day, I was showing Tim Doherty some photo locations around Three Rivers, Massachusetts. I described to him how the railroad once had a spur into the old Tampax factory.
The spur (siding) had a switch off the mainline near the station (demolished many years ago), then crossed Main Street and made a sharp curve behind the liquor store before crossing Bridge Street. There’s still vestiges of this track today.
Back in 1984, Dan Howard was visiting from Needham and he and I drove around the Palmer area making railway photos (as you do). The prize of the day, was this photo of CV’s SW1200 1510 working the Tampax factory spur on the Bridge Street Crossing.
It is one of the few photos I have of a CV switcher working in the Palmer area, and one of the few times I caught a rail movement on the Tampax spur. (Might creative minds develop some accompanying humor ??)
This photo was exposed on Kodak Ektachrome 200 slide film with my Leica 3A using my 50mm Summitar lens. It was a sultry dull day, and not the best for photography. While this is not a world class image, it captures a scene never to be repeated.
Looking East at Palmer May 1985
Yesterday (July 10, 2013), I posted night photos I made in Palmer on June 28, 2013. I mentioned that my night photography efforts were part of a long standing tradition. So I dug up this image of the Palmer station exposed nearly three decades earlier.
This was undoubtedly made on a Friday evening. A thick fog from the Quaboag River had enveloped the valley. In the station parking lot, and out of sight, Bob Buck is holding court.
That night I made several views of the Palmer station in silhouette. All were exposed with my old Leica 3A and a 50mm lens, probably a Canon screwmount which I favored at the time. I was using my father’s Linhof tripod to support the camera. Exposure was calculated strictly from experience, and was probably about 30 seconds at f2.8.
Interestingly, just the other day (July 9, 2013) I had the opportunity to interview Jim Shaughnessy about the night photography techniques he used to capture steam locomotives on film back in the 1950s. While similar to mine, his approach was very different and he perfected it more than three decades before my image was exposed.
Where I used 35mm film and strictly ambient light for this image, Jim tended to use a 4×5 camera and a skilled combination of ambient and artificial flash.
Of course, I was well acquainted with Jim’s work by the time I made this photo. There has been a copy of Donald Duke’s 1961 book Night Train on our shelf for as long as I can remember! This features Jim’s work among that of other well-established practitioners of the art of railway night photography.
One Busy Evening.
I don’t remember making my first night photo in Palmer. But I do recall spending Friday evenings there in the 1980s with Bob Buck and company, watching and photographing Conrail and Central Vermont. See: Drowning the Light
The Friday evening tradition was maintained on June 28, 2013, when a group of us convened, as we have for many years, near the old station. A few weeks earlier, I posted some photos made on exceptionally wet Friday night. By contrast, June 28th was warm, dry and very pleasant. And busy too!
The variances of railway freight operations make it difficult to pin point precisely when trains will pass or arrive Palmer. Complicating matters on the week of June 28, was on-going undercutting on CSX’s B&A route (see: Ballast Train East Brookfield), and the after effects of a serious derailment on the Water Level route near Fonda, New York a few days earlier.
However, these events appear to have benefited us on the evening of the 28th. I arrived at CP83 (the dispatcher controlled signals and switch at west end of the controlled siding, 83 miles from Boston) just as CSX’s westward Q437 was rolling through.
New England Central had no less than three trains working in Palmer, jobs 604, 606, and 611, and these entertained us for the next couple of hours. In addition, we caught more action on CSX, including a very late train 448, Amtrak’s Lake Shore Limited.
I made these photos using my Lumix LX3 and my father’s Gitzo carbon fiber tripod. Some of the exposures required the shutter to remain open for 25 seconds or longer.
