Last week I traveled with fellow photographer Mike Gardner to Brattleboro, Vermont to make images of the New England Central Railroad.
In this view, I photographed Mike photographing the train as it works the south end of Brattleboro yard.
Filtered morning sun, snow and hoar frost all added to the atmosphere.
This was exposed on Ilford HP5 using a Leica IIIA with 50mm Summitar lens—the camera & lens combination with which I made thousands of photos between 1977 and 1986.
Yesterday (December 23, 2016) dawned clear and bright. Everything fell into place nicely, and without too much effort on my part, I made some nice photos of a New England Central (NECR) empty ethanol extra rolling through Monson.
Lately it seems that the elusive loaded ethanol trains tend to reach Stateline Hill in darkness. Over the last few weeks I’ve heard a number of these heavy trains laboring up the grade.
So, I was happy to catch this move. Not only was it the longest train I’ve photographed on the NECR in Monson, but it was my first time catching Providence & Worcester’s relatively new SD70M-2s.
Providence & Worcester EMD-built SD70M-2 4302 leads an empty ethanol extra at Washington Street in Monson. It was here in June 2011 that a tornado swept through the town destroying dozens of buildings and thousands of trees—an event that made international news. I made this image using my FujiFilm XT1 with 18-135mm zoom lens. Later, I made minor adjustments in post processing to lighten the shadows.
Now that P&W and New England Central are both part of the Genesee & Wyoming family, perhaps these big locomotives will make more frequent appearances on the NECR line over Stateline Hill.
The familiar sound of 645 thunder down in the valley spurred me into action.
A southward New England Central freight was climbing Stateline Hill in Monson, Massachusetts. This is an old routine (and yes, I’ve written about this before.)
When I hear a train coming through Monson, I have a few minutes to get organized. In this instance, a brilliant clear blue dome with nice morning light was the deciding consideration.
En route, I heard the southward train get its ‘paper’ (radio–issued track authority) to proceed toward Willimantic, Connecticut. In this instance, I was alerted to the location of the train; south of milepost 55 (near the Massachusetts-Connecticut state line).
I headed for my preferred spot in downtown Stafford Springs, Connecticut south of milepost 49.
FujiFilm XT1 digital photo.
One advantage of Stafford Springs is that the railroad makes an east-west twist through the village on its otherwise north-south run. This favors the morning light for a southward train.
The other advantage is Stafford’s quaint and distinctive New England setting.
I made these photos the other evening at Bridge Street in Monson, Massachusetts.
New England Central 608 from Willimantic, Connecticut was paused waiting for traffic ahead to clear up.
Despite the cold, I took the opportunity to make a few time exposures with my Lumix LX-7. My exposures were aided by a blanket of crusty snow that reflected some of the ambient light.
NECR 608 at Bridge Street in Monson, Massachusetts.
To keep the camera from shaking, I rested it on the handrails of the bridge and used the self timer to actuate the shutter. I exposed in ‘M’ mode (manual) using the camera’s histogram to gauge the length of my shutter opening.
Owing to the dimly lit scene, I still needed to boost the shadows in post processing to allow for a more visually appealing image. Opportunities such as this make for good exercises in existing-light night photography.
This is a slightly telephoto view of the same scene. The tricky part was keeping the camera steady for 25-30 seconds without the use of a tripod. Why not set up a tripod? Time. I had only a few moments to compose and expose this view. Fumbling with a tripod in the cold and dark would have delayed my efforts.
The other day down in the valley I heard the roar of a train ascending the old New London Northern grade to State Line.
EMD diesels working hard.
“Hmm. That’s odd. Daylight move on the New England Central?”
In recent months, New England Central’s freight south of Palmer, Massachusetts has been largely nocturnal.
I thought I’d best investigate, I hopped in my car and headed south to intercept.
Driving toward Stafford Springs, Connecticut I heard a telemetry hit on my scanner. (That’s the FRED—the end of train device the sends a signal reporting air-brake pressure from the tail end of the train to the engineer’s cab.) I knew the train was close.
Then, chatter on the radio: engineer to conductor. They were working the ground. The train was switching.
I altered my path and went to the south switch at State Line siding at Crow Hill Road, Stafford.
There I found the train: An NECR local freight from Palmer putting cars in the siding.
View from Crow Hill Road, Stafford, Connecticut. Lumix LX7 photo. I manually underexposed by 2/3s of a stop to compensate for the snow.
Sixteen loads and five empties.
At one end was a GP38 that’s nearly as old as I am. At the other end was NECR’s Tunnel Motor, engine 3317. A former Southern Pacific engine.
After dropping its cars on the siding, the crew of NECR’s local freight pulled across and prepared to head back north to Palmer. This allowed me to take a good look at the Tunnel Motor—so-called because of its specially designed air-flow arrangement originally configured for high-altitude operation in tunnels and snow sheds on Southern Pacific’s rugged line over Donner Pass in the California Sierra.
That’s neat. I’d never seen NECR’s Tunnel Motor south of Palmer before.
Sorry, did I mention that New England Central’s reporting marks are NECR?
NECR’s conductor sets the derail on the siding. Lumix LX7 photo.I drove to the north-end of the siding which begins just north of the Connecticut-Massachusetts line. Look to the right of the engines and you’ll see the crudely cut granite marker for the border.Not so many years ago, six-motors were banned from operation south of Palmer. These days it’s not so unusual. However, daylight moves don’t occur on a regular basis. Lumix LX7 photo.
The other day, New England Central 611 was struggling. The train had departed Brattleboro, Vermont with a heavy consist. Complicating matters was that the locomotives weren’t cooperating and the rails were damp with lots of freshly fallen leaves.
While this made for a tough morning’s work for the 611 crew, it provided ample opportunities for me to make photographs (and gave good sound show too).
The sun was playing late-autumn hide and seek with the clouds, but at Leverett, Massachusetts I was rewarded by burst of sun.
Many years ago, before my time, there had been a grade crossing a Leverett. Today, Route 63 crosses on a modern concrete overpass fitted with narrow-mesh fences (no use for photography.)
I opted for a location below the bridge (near where the old grade crossing had been) in order to frame up the train in a tree that was still clinging to its rusty leaves.
This was one of burst of exposures I made with my FujiFilm X-T1 Digital camera.
Late Autumn in a familiar place: on October 31st, I met Rich Reed & company at Palmer for a visit at Palmer Hobbies and lunch at the Steaming Tender. Rich was dressed in costume as one of the Blue Brothers from the early ‘80s film.
Rich Reed as one of the Blues Brothers. Lumix LX7 Photo.
Afterwards we observed New England Central’s freight from Brattleboro, job 611, that arrived at the Palmer diamond led by tunnel motor (originally an EMD SD40T-2, now designated an SD40-2) number 3317 in Genesee & Wyoming corporate paint—colors that are remarkably well-suited for the day: orange, yellow and black.
New England Central 611 cross in CSXT’s former Boston & Albany at Palmer. Lumix LX7 Photo.Lumix LX7 Photo.
From Palmer we traveled up to West Warren to roll by Amtrak’s westward Lake Shore Limited against a backdrop of late-season foliage.
Amtrak 449 the westward Boston-section of the Lake Shore Limited passes the old mills at West Warren, Massachusetts on Halloween Day 2015. Lumix LX7 Photo.
When in doubt, try again. Earlier in the week Mike Gardner and I had missed the New England Central at Millers Falls, Massachusetts. It wasn’t for a lack of trying, but we’d misqued, got caught in traffic, and just not been at the right place at the right time. This happens.
It was a bright morning. From recent experience I knew that New England Central job 611 departs Brattleboro Yard for Palmer sometime after 8 am.
The former Central Vermont Railway Millers Falls high bridge—a pin-connected deck-style Pratt truss built in 1906.
I drove directly to Millers Falls, I did not pass Go, I did not collect $200. I parked and walked (I fought my way through thicket and briars) to a known good spot on a rock near the shore of the Millers River and there I waited.
This was my reward. And yes, I also exposed a color slide.
Exposed with a FujiFilm X-T1 mirror-less digital camera.
As a follow up to the black & white variations I posted the other day showing Central Vermont Railway RS-11s crossing the Palmer diamonds, I exposed this view made at precisely the same location.
In 1984, Conrail’s directional double track line crossed Central Vermont. Today, CSXT’s single track line crosses Genessee & Wyoming’s New England Central.
New England Central southward freight waits to cross CSXT’s former Boston & Albany at Palmer, Massachusetts on October 14, 2015.New England Central southward freight waits to cross CSXT’s former Boston & Albany at Palmer, Massachusetts on October 14, 2015. Lumix LX7 photo.Palmer April 13, 1984.
More than just the tracks, names and locomotives have changed.
The names and the paint have changed, but the machinery?
Back in Central Vermont days in the 1980s and early 1990s, it was common enough to see in Palmer, Massachusetts run-through Canadian National GP40-2L locomotives (some people prefer the alternate designations ‘GP40-2W,’ ‘GP40-2LW’ take your pick, I don’t mind).
Fast forward a few decades: Canadian National is no longer ‘national.’ New England Central has replaced Central Vermont, and New England Central has passed through a series of corporate ownerships. Today, the railroad is part of the Genesee & Wyoming family, making it one of more than 110 lines world wide under this orange and yellow flag.
New England Central 3039 catches the morning light in Palmer, Massachusetts. This old engine has been working for more than four decades. Exposed digitally with a Fujifilm X-T1.
Tight view of the Canadian-style safety cab on 3039. Exposed with a Fujifilm X-T1.
Yet, despite all this, after more than 40 years on the move, some old former CN safety cabs GP40-2s (NECR 3015 is now listed on the cab as a GP40-2CU) still routinely work former CV rails in Palmer.
I wonder if I have photographs of these very same locomotives in Canadian National paint?
On evening of May 1, 2015, a northward New England Central freight crosses the Palmer diamond with locomotive 3015 in the lead. Exposed digitally with a Fujifilm X-T1.1/60th of a second makes for a subtle panned view of NECR 3015 in Palmer. Exposed with a Fujifilm X-T1.
On December 17, 2014, I rode the Vermonter to Amherst. This gave me the opportunity to scope the line for photo locations. Although I’ve traveled this route on various occasions, I wanted one last look at it from an Amtrak train before service is moved to the ‘Knowledge Corridor’ at the end of this month.
North of Barretts is Canal Junction, a little known location where the Boston & Maine’s Central Massachusetts line once joined the Central Vermont route. Originally, B&M had its own line that ran parallel to CVs and this old right of way is now a cycle path.
The old Boston & Maine line through Belchertown was abandoned in the 1930s in favor of trackage rights over the parallel Central Vermont. Today the old right of way is a bicycle path. Canon EOS 7D with 200mm lens.
North of the Old Springfield Road grade crossing, I noticed a swampy clearing that looked like a good place for a photo. So, on December 19th, my dad and I investigated this location.
Earlier in the day we had photographed a Knowledge Corridor test run (covered in an earlier post), and I thought this would make an ideal opportunity to capture Amtrak moves on both lines on the same day.
We arrived at Old Springfield Road, and walked a short distance on the old B&M right of way. I’d gone back to the car to retrieve a lens and make a phone call, when I heard what sounded like a heavy freight coming.
Hark! I think I hear a freight. Richard Jay Solomon has his Lumix LX7 on a Gitzo tripod. We a standing on the old B&M line. There’s little chance we’ll get run over by a 4-4-0 sprinting for Northampton. Exposed with a Canon EOS 7D with 40mm pancake lens.
Sure enough it was! New England Central’s southward manifest freight from Brattleboro to Palmer had stalled climbing Belchertown Hill, and had just got moving again. Amtrak was only a few miles behind.
New England Central’s southward freight on December 19, 2014. Lumix LX7 Photo.Just a few miles behind the freight was Amtrak’s southward Vermonter. We’d gone out for the Vermonter, and lucked into the delayed freight train. This was especially fortuitous because we’d stopped for lunch at Amherst on the way to this ‘new’ location. Lumix LX7 photo.
We caught the freight, and about 10-15 minutes later got Amtrak train 55 (southward Vermonter), then proceeded to Three Rivers where we caught the Vermonter a second time.
It’s been nearly 20 years since New England Central assumed operations from Central Vermont.
In that time New England Central has had three owners. Originally a RailTex property, it was owned by RailAmerica for more than a dozen years and now is a Genesee & Wyoming railroad.
Despite that, a few of its original GP38s remain painted in the blue and yellow scheme introduced when the railroad began operations in February 1995.
NECR 3850 was working job 603 in Palmer and paused for a minute on the interchange track. Although I’ve photographed this old goat dozens of times in the last two decades, I opted to make a series of images with my Lumix LX7 to demonstrate the different color profiles (color ‘styles’) built into the camera.
As I’ve mentioned in previous posts, one of the great compositional tools available with the Lumix LX7 (and other cameras too) is the ability to quickly change from one color profile to another (including black & white modes).
Although, it is easy enough to adjust and alter color in post processing, I find it is useful to be able to compose a scene on-site knowing how the camera will react to color and contrast.
Below are a sequence of similar images of 3850 using different built-in color profiles. I’ve adjusted the B&W ‘monochrome’ profile in-camera to better suit my personal taste.
Image 1—Lumix ‘Vivid’ color profile.Image 2—Lumix ‘Natural’ color profile. Please note that term ‘Natural’ is purely subjective and does not infer any unusual treatment as compared with the other profiles. In other words ‘natural’ is just a name.Image 3—’Scenery’ Lumix color profile.Image 4—’Monochrome’ Lumix color profile.Image 5 ‘High Dynamic Range’ setting. (this blends three images exposed automatically in rapid succession. Fine for static scenes, but not practical for moving trains).
Which of the photos do you like the best?
Of course every computer display has its own way of interpreting color and contrast. Compare these images on different screens and see how they change.
Tracking the Light posts new material every morning.
New England Central at Montpelier Junction, Vermont.
Dubie campaign train approaches Montpelier Junction, Vermont on the afternoon of August 28, 2010. Canon EOS 7D with 28-135mm lens.
A freshly scrubbed GP38 led a pair of Pennsy passenger cars in a classic old-school whistle-stop campaign tour of Vermont.
On August 28, 2010, my dad and I drove to the Georgia high bridge (near St. Albans, Vermont) to intercept a New England Central special train hired by gubernatorial candidate Brian Dubie.
It was a sunny warm summer’s day, and we made numerous photos of the special as it worked its way south.
This pair of images was exposed at Montpelier Junction, where the train made a stop for the candidate to make a speech to his supporters. Traditionally, this was where Central Vermont met the Montpelier & Barre.
I used a telephoto for these views in order to emphasize the bunting and flags that marked the train’s distinctive qualities. Several of my photographs of the train appeared in Private Varnish.
The other day, I had a few packages to send out. I’d delayed going to the post office until after the school buses were out, using the logic that if I waited, I wouldn’t get stuck behind one on the way back.
On the way into the PO, I heard a distant whistle. And while at the desk, a train rumbled by.
New England Central’s (NECR) former Central Vermont line runs on a slightly elevated gradient behind the Monson, Massachusetts PO. This is on the climb up State Line hill, and heavy trains make a good racket coming though town. This freight, however, wasn’t very heavy and the engines weren’t working too hard.
I made an expeditious exit after mailing my packages, and started south on Route 32. No sooner than I was south of town, I found myself looking at the back of a school bus!
And this bus then stopped, as required, at the South Monson grade crossing.
I could hear the southward climbing. It had already gone through. Fortunately, once over the tracks, the bus driver kindly pulled in to let traffic around. I sailed southward, and arrived at State Line crossing. Once out of the car, I could hear the train working.
New England Central’s daily freight at the Massachusetts-Connecticut state line. Notice the granite marker to the left of the locomotives. Exposed with a Lumix LX3, set at ISO 200.
Although the light was fading, there was enough to work with. While, I’d left most of my cameras at home, I had my Lumix LX3 in my coat pocket. I set up a shot immediately south of the Massachusetts-Connecticut state line, and included the granite marker at the left of the image.
After the train passed, I followed it to Stafford Springs, where I made a few more photos. As it turns out, these NECR images are my first railway photos for 2014.
New England Central’s GP38s lead a southward freight through downtown Stafford Springs, Connecticut on January 9, 2014.New England Central’s GP38s lead a southward freight through downtown Stafford Springs, Connecticut on the afternoon of January 9, 2014. Lumix LX3 photo.
New England Central’s local freight with locomotive 3015 idles in front of the Palmer Yard (Massachusetts) office. I exposed several images, this one was at about 15 seconds.
The other night in Palmer, Massachusetts an arctic breeze was blowing, but that didn’t stop me from making time exposures to capture the holiday spirit.
I exposed these photos despite numb hands and cold feet. I used my Lumix LX-3 (choice night camera in cold weather) fitted to a large Bogen tripod.
Years ago, I fitted plastic-foam pipe insulation to the tripod legs (as per recommendation by experienced cold-weather photographer Mike Gardner). This makes it easier to handle the tripod when it’s very cold.
My exposures varied from about 1.6 seconds at f2.8 (ISO 200) to 25 seconds at f4.0 (ISO80). I set the camera manually using the histogram from test exposures to gauge my settings.
Christmas lights on dark nights make for exceptionally difficult contrast. If you overexpose to allow good shadow detail the lights get blown out (losing their color[s] as a result). Underexpose to feature the lights and the sky and shadows turn to an inky black.
Somewhere in between is a compromised setting. Rather than ponder the subtleties of the histogram as the blood in my toes congealed, I opted to take a series of images, one after the other, and select the best of the bunch in a warm environment later on.
Palmer’s star railroad themed restaurant is the Steaming Tender; this has been colorfully decorated with holiday lights. I made a series of exposures from several angles. This one was exposed correctly for the lights and looked good in the histogram, but appears too dark in my opinion. I prefer the image below.This is about one stop brighter. While I feel it looks better overall, one noticeable flaw is that the ‘Steaming Tender’ sign is overexposed and the lettering isn’t readable. Ultimately the solution may be to blend two images of different exposures in post processing, but I’ve not bothered to do that yet.New England Central’s 3015 pauses in the yard for a 25 second time exposure. I wonder if the car adds an element of interest to the photo? If not now, maybe in years to come. Lumix LX3 photo.Looking toward CP83 (interlocking at the west end of Palmer) and the old Union Station (now the ever-popular Steaming Tender restaurant). A westward CSX intermodal train from Worcester is gliding through the scene. I exposed this at about 5 seconds at ISO 200. It is about 1.5 stops ‘over exposed’ as per the camera meter, but by using a much lighter exposure I’ve captured the effect of the moonlit high clouds and textures of the snow. On the downside, some of the Christmas lights have blown out (become seriously overexposed).
Last Friday evening, November 16, 2013, I stopped by New England Central in Palmer, Massachusetts on my way to meet friends for dinner.
The moon was nearly full and a venerable GP38 was resting in the yard. Here was an opportunity for a photograph (or two)!
Lumix LX-3 photograph: exposed for 30 seconds at f2.8 at ISO 80. Notice my shadow at far left.
I’ve made numerous images of New England Central 3855, since this locomotive arrived with the creation of the railroad nearly 19 years ago. So why bother make more, especially on a chilly November evening?
My short answer: because it was there to photograph.
The long answer: the moon was out casting a surreal glow across the Palmer yard and the mix of moonlight and sodium vapor street lights inspired me to expose some long time exposures.
I positioned my Lumix LX3 on my large Bogen tripod and manually set the camera. I carefully avoided direct light by using tree branches and nearby buildings as natural lens shades. I also minimize the effect of street lamps in the photograph, while aiming skyward to catch the twinkle of evening stars. (On the full-sized un-scaled RAW file, the stars are very clear in the sky. Unfortunately the scaled and compressed images do not translate as well as I’d hoped.)
Lumix LX-3 photograph: exposed for 15 seconds at f2.8 at ISO 80. The best part of this image is the tree shadow on the locomotive side.
Unusual Locomotives Cross the Millers High Bridge.
There’s something very ‘October’ about Millers Falls. It’s just a bit spooky and has an air of decay and rust about it. The village has seen better times, but it’s a great place to photograph trains.
On October 22, 2013, Amtrak ran a set of light engines on New England Central from Palmer to North Walpole.
These are unusual locomotives: built as model GP40TC for Canada’s GO Transit they were acquired by Amtrak and later converted into ‘GP38-2TCs’ by Altoona shops. (Thanks to Rich Reed for help in identifying locomotive’s lineage). Amtrak tends to assign them to maintenance trains. They are rare visitors to the New England Central at Millers Falls. Canon 7D photo.
I spent the morning at Millers Falls photographing New England Central and Pan Am Railways freights, and culminated my efforts with this image of Amtrak’s engines crossing the Millers River on the high bridge.
This pin-connected deck truss dates from the early 20th century and like just about everything in Millers Falls has a look that harks back to another time.
I exposed the image of the bridge with my Canon 7D fitted with a f2.0 100mm lens. I made some minor adjustments to the RAW file in post-processing to adjust color balance, saturation and contrast to improve the look of the silver locomotives against colorful autumn trees, then converted the file to a relatively small Jpg for display here.
While several locomotives have been painted in the new corporate colors (or rather, G&W’s traditional paint scheme), many of New England Central’s locomotives remain in various former liveries, including the railroad’s original blue and yellow.
On Monday October 28, 2013, New England Central job 610 (a turn that runs from Willimantic, Connecticut to Palmer, Massachusetts) sported a pair of nicely painted G&W locomotives.
My dad and I made chase of this train on its southward run. I exposed digital still photographs, while Pop made some video clips with his Lumix LX7.
The sun was playing tag with us, but the locomotives were so bright and clean it hardly mattered if the sun was out or not.
The view from Smith’s Bridge on Stafford Hollow Road in Monson, Massachusetts where Bob Buck exposed dramatic photos of Central Vermont steam more than 60 years ago. New England Central job 610 climbs the grade toward State Line. Canon EOS 7D fitted with 20mm lens.Richard J. Solomon (at left) exposes a short video clip as New England Central job 610 passes Stafford Springs, Connecticut. Canon EOS 7D fitted with 20mm lens.New England Central job 610 works south of Stafford, Connecticut on October 28, 2013. Canon EOS 7D fitted with 20mm lens.
In recent months, New England Central’s operations have been altered. This has benefits for photography. Since the times trains tend to run have changed, different locations have opened up for photographic possibilities.
For many years, New England Central operated a southward freight from Palmer, Massachusetts in the early morning (typically as job 608), this worked into Connecticut (to Willimantic and beyond) and returned in the afternoon or early evening.
Now, on many days, the railroad runs a turn from Willimantic to Palmer (often as job 610), that goes on duty at Willimantic in the morning, runs northward to Palmer, and returns. From my experience the return times vary considerably.
Once I was aware of this change, I began thinking about various places to make photographs based on afternoon lighting angles. Last week, I heard 610 working south from Palmer. I was in luck as a pair of vintage GP38s in the railroad’s original scheme (the locomotives were painted by Conrail in preparation for New England Central’s February 1995 start up).
Track speeds south of Palmer make following a train easy enough. My first location was Stafford Springs, where I’ve often exposed photographs of New England Central. From there I followed southward.
New England Central GP38s lead freight 608 southward at Eagleville, Connecticut on October 21, 2013. Exposed with a Canon EOS 7D with 40mm pancake lens.
My final location of the day was at the Connecticut Eagleville Preserve, where the line passes an old Mill dam (I’m not well versed on the specific history of this dam, but the arrangement is common enough in New England, where in the 19th century water powered local industries. For more information on the park and area see: http://www.willimanticriver.org/recreation/pg_park_eagleville-preserve.html).
Afternoon sun favors this location, and I made the most of the light, waterfall and autumn foliage as well as the GP38s.
The Lumix LX3 has a sliding switch above the lens that allows control of the camera’s aspect ratio (in other words the relative dimensions of the frame). This gives the photographer the ability to compose images using different proportional rectangles and easily change from one to another as it suits the composition.
I find this an extremely valuable tool when making railway images. There are three basic ratios, 4:3, 3:2, and 16:9 (popular as the HDTV video format), as well as a 1:1 square ratio (that must be accessed using the camera menu). Most of the time I use the 3:2 aspect because this makes maximum use of the sensor area.
The 16:9 aspect gives a broader rectangle that can be very useful in landscape style images. It is a good format for photographing railway locomotives and equipment broadside, and can be used to accentuate a variety of compositions.
New England Central GP38s work the interchange track at Palmer, Massachusetts on October 17, 2013. Lumix LX3 with 16:9 aspect ratio.
Keep in mind, the aspect ratio simply determines the dimensions of the rectangle and does not affect the focal length of the lens (controlled separately).
Someone might ask, ‘why not just shoot everything with the sensor at its maximum and then crop later?’
I find that using the different aspect ratios in the field changes the way I see and thus allows me to compose images that I might not recognize otherwise. While I could certainly crop after exposure, having the ability to work on site produces a different photograph (and perhaps more intuitive) than one cropped later.
New England Central locomotives at Palmer, Massachusetts. Lumix LX3 with 16:9 aspect ratio.
I’ve included a variety of 16:9 aspect images exposed over the last ten days. Along with a comparison between a 3:2 and 16:9 aspect of the same subject.
Connecticut Trolley Museum’s New Orleans Public Service car crosses a road near East Windsor, Connecticut on Sunday October 20, 2013. Lumix LX3 with 16:9 aspect ratio. The broader rectangle facilitated this split composition that both features the streetcar and the road it has just crossed.Pan Am Railway’s symbol freight 190ED at East Deerfield Yard on October 18, 2013. Using the 16:9 aspect ratio made it easier to include the colored foliage on the right while retaining a strong image of the locomotives. LX3 photo.
This pair of image demonstrates the relative dimensional difference between the 3:2 aspect ratio (top) and the 16:9 aspect ratio (bottom).
New England Central symbol freight 611 waits for a crew at Brattleboro, Vermont on the morning of October 18, 2013. Exposed using the 3:2 aspect ratio.Combination of a lower angle and the 16:9 aspect ratio allows for a more dramatic image that minimizes distracting foreground elements. Lumix LX3 photo.
Trains Converge on Palmer; 2 Hours of Non-stop Action.
At 2:02 pm, New England Central GP38 3855 works CSX’s Palmer yard. Canon EOS 7D photo.
In the 1980s, Trains Magazine occasionally ran articles that featured ‘hot spots’ illustrated by sequences of photos showing different trains passing the same place over the course of hours.
These always caught my attention. While the individual images ranged from pedestrian to interpretive, the collective effect produced an understanding of how a busy spot worked.
Trains tend to arrive in clusters. Hours may pass where nothing goes by except a track car, then trains arrive from every direction. The astute photographer has learned when to make the most of these situations.
Palmer, Massachusetts can be a busy place, if you’re there at the right time. CSX’s east-west former Boston & Albany mainline crosses New England Central’s (NECR) former Central Vermont line at grade. An interchange track connects the two routes and serves as connection to the former B&A Ware River Branch operated by Massachusetts Central.
Afternoon tends to be busy. Among the moves through Palmer are Amtrak’s Vermonters that use CSX’s line between Springfield and Palmer, and NECR’s line north of Palmer toward Vermont. There isn’t a direct connection to allow an eastward train on the CSX route to directly access the NECR’s line.
To compensate for this, Amtrak’s trains must use CSX’s controlled siding to access the interchange track, and this to reach the NECR. This requires trains to reverse direction. As a result, Amtrak trains either have locomotives on each end or run with a push-pull cab control car.
On the afternoon of October 17, 2013, the interchange track proved one of the busiest lines in Palmer and was used by a succession of NECR, Mass-Central, and Amtrak trains.
Complicating matters was Amtrak 57 (southward Vermonter) which was running more than an hour behind its scheduled time, and so met its northward counterpart at Palmer. New England Central was also busy with no less than three trains working around Palmer about the same time.
I’ve put the following photos in sequence with the approximate times of exposure. I stress ‘approximate’, since my digital camera’s clocks not only didn’t agree on the minutes passed the hour, but were set for different time zones as a function of recent travel.
It was a nice bright day too. Patrons at Palmer’s ever popular Steaming Tender restaurant (located in the restored former Palmer Union Station) were entertained with a succession of trains passing on both sides of the building.
A southbound New England Central local approaches the Palmer diamond at 2:33 pm. Canon EOS 7D photo.At 2:49 pm Mass Central’s freight from South Barre looks to work the interchange track to reach the CSX yard. Canon EOS 7D photo.New England Central 3809 has gone across the diamond to collect southbound train 611 and is now returning with the train and looking to re-cross CSX . Canon EOS 7D photo.Having dropped its interchange and collected its cars from CSX’s yard, Mass-Central 960 returns west on the interchange track at 3:23 pm. A New England Central local with engine 3855 can be seen in the distance working the yard. Canon EOS 7D photo.Photographer Paul Goewey focuses on Mass-Central as the train passes over the interchange. Lumix LX3 photo.Paul inspects his results.At 3:37pm Amtrak 56, the northward Vermonter crosses the Palmer diamond and enters the controlled siding at CSX’s CP83. Its locomotive, P42 153 is shoving at the back. The Steaming Tender is in the old station building on the left. Canon EOS 7D photo.With Amtrak 56 tucked in on the controlled siding, New England Central’s local passes on the interchange track at 3:40 pm. Lumix LX3 photo.Amtrak 56 has pulled forward onto the interchange and then reversed back again to make room for its southward counterpart to access the switch that connects the interchange track with CSX’s controlled siding. Lumix LX3 photo.Amtrak’s southward (left) and northward (right) Vemonters are nose to nose at Palmer. Lumix LX3 photo.At 408pm, both Vermonters depart Palmer. The train on the left, leading with P42 number 153, is heading north to St Albans, Vermont, while on the right the southward train will exit CSX’s controlled siding and head west toward Springfield before continuing south to New York, Philadelphia and Washington DC. Lumix LX3 photo.
Not bad for one afternoon! Yet, not a CSX train in sight. These days much of CSX’s business passes Palmer in darkness.
Orange Engine at Stafford Springs, Ct., and Irish Rail’s IWT Liner in Dublin.
New England Central 3015 in fresh Genesee & Wyoming corporate colors passes the Stafford Historical Society in Stafford Springs, Connecticut. Canon EOS 7D with 28-135mm lens.
Irish Rail’s IWT liner passes Islandbridge Junction in Dublin.
Last week I made these photos, nearly exactly 24 hours apart (one in the morning, the other in the afternoon).
The first image shows New England Central’s freshly painted GP402-L 3015 leading a southward freight at Stafford Springs, Connecticut. I was delighted to finally get this elusive orange engine operating on a road-freight in daylight.
The next image was made in Dublin, after a trans Atlantic crossing courtesy of Aer Lingus. This shows locomotive 073 struggling along with the second IWT Liner at Islandbridge Junction near Heuston Station in Dublin, Ireland.
Later, I heard through the grapevine that 073 failed a few miles down the line and require assistance.
Both images were made with my Canon EOS 7D. Also both feature 1970s-era General Motors diesels singly hauling freight under bright sunny skies.
A headlight illuminates freight cars at New England Central’s Palmer Yard on Friday July 12, 2013. Lumix LX3 photo.
Although Palmer is a relatively small town, it has long been the focus of railway activity. Today, it hosts yards for both New England Central and CSX, as well as nominal terminal facilities for Mass-Central.
CSX has a four-mile dispatchers controlled siding the runs from CP79 to CP83 (the numbers are based loosely interpret mileage from South Station, Boston). Just past the west switch at CP83 is the level crossing with New England Central—colloquially known as the Palmer Diamond. The popular Steaming Tender restaurant occupies the old Union Station between the two lines.
New England Central home signal at the ‘Palmer Diamond’ on July 12, 2013. Lumix LX3 photo.New England Central 606 heading north across CSX’s former Boston & Albany main line. Lumix LX3 photo.
After 10pm, trains converged on CP83. A CSX westbound on the main track met an eastward freight running via the controlled siding, as New England Central’s northward job 606 was looking to cross CSX to double its train together before heading toward Vermont.
The awkward nature of the former Central Vermont yard at Palmer complicates operations over the CSX diamond. Not only is the yard too short to hold long trains, but the yard was built on a grade which crests at the CSX (former Boston & Albany crossing).
A CSX westward freight holds at CP83 as New England Central 606 heads north. The Steaming Tender is located in the old Palmer Union Station. Lumix LX3 photo.
Challenges for railroaders produce opportunities for photography, especially in the evening hours. As the railroads weaved their trains through Palmer, I made a series of photos.
However, time was catching me up: I’d had a long day and by 11pm, I needed a bit of that elusive commodity—sleep. As Bob Buck would have said, I was the ‘hero’, and departed as more trains were focused on Palmer. The approach lit signals at CP83 were still lit when I hit the road. The regular gang can report on what I missed!
New England Central, South of Stafford Springs, July 16, 2013
I rarely post photos the same day I make them. Today is an exception. Why? Because, I feel like sharing this image now rather than waiting. It’s a photo I made a little more than an hour ago of New England Central’s southward freight running from Palmer to Willimantic, Connecticut.
I exposed this using my Canon EOS 7D and 28-135mm zoom lens. The flexibility of the zoom allowed me to more easily frame the locomotives with grade crossing signals at the right. The train was still en route to Willimantic by the time I was home and downloaded the images.
Central Vermont SW1200 1510 works the Tampax Factory spur at Bridge Street in Three Rivers, Massachusetts back in May 1984. Exposed on Ektachrome 200 with a Leica 3A and 50mm Summitar lens. Scan modified in post processing to improve contrast and exposure and minimize dust spots.
The other day, I was showing Tim Doherty some photo locations around Three Rivers, Massachusetts. I described to him how the railroad once had a spur into the old Tampax factory.
The spur (siding) had a switch off the mainline near the station (demolished many years ago), then crossed Main Street and made a sharp curve behind the liquor store before crossing Bridge Street. There’s still vestiges of this track today.
Back in 1984, Dan Howard was visiting from Needham and he and I drove around the Palmer area making railway photos (as you do). The prize of the day, was this photo of CV’s SW1200 1510 working the Tampax factory spur on the Bridge Street Crossing.
It is one of the few photos I have of a CV switcher working in the Palmer area, and one of the few times I caught a rail movement on the Tampax spur. (Might creative minds develop some accompanying humor ??)
This photo was exposed on Kodak Ektachrome 200 slide film with my Leica 3A using my 50mm Summitar lens. It was a sultry dull day, and not the best for photography. While this is not a world class image, it captures a scene never to be repeated.
I don’t remember making my first night photo in Palmer. But I do recall spending Friday evenings there in the 1980s with Bob Buck and company, watching and photographing Conrail and Central Vermont. See: Drowning the Light
New England 611 crawls southward across the Palmer diamond on June 28, 2013. Lumix LX3 photo.New England 611 glides into Palmer on June 28, 2013. Lumix LX3 photo.
The Friday evening tradition was maintained on June 28, 2013, when a group of us convened, as we have for many years, near the old station. A few weeks earlier, I posted some photos made on exceptionally wet Friday night. By contrast, June 28th was warm, dry and very pleasant. And busy too!
The variances of railway freight operations make it difficult to pin point precisely when trains will pass or arrive Palmer. Complicating matters on the week of June 28, was on-going undercutting on CSX’s B&A route (see: Ballast Train East Brookfield), and the after effects of a serious derailment on the Water Level route near Fonda, New York a few days earlier.
However, these events appear to have benefited us on the evening of the 28th. I arrived at CP83 (the dispatcher controlled signals and switch at west end of the controlled siding, 83 miles from Boston) just as CSX’s westward Q437 was rolling through.
New England Central freights 604 and 606 at Palmer, Massachusetts. Lumix LX photo.New England Central 2680 on train 604 at Palmer. Lumix LX3 photo
New England Central had no less than three trains working in Palmer, jobs 604, 606, and 611, and these entertained us for the next couple of hours. In addition, we caught more action on CSX, including a very late train 448, Amtrak’s Lake Shore Limited.
I made these photos using my Lumix LX3 and my father’s Gitzo carbon fiber tripod. Some of the exposures required the shutter to remain open for 25 seconds or longer.
Amtrak’s 448 Boston Section of the Lake Shore Limited eastbound at CP 83 in Palmer. Lumix photo.Limited clear off the control siding at CP83.
Tuesday, May 21, 2013 was a clear bright morning. I heard New England Central’s 608 climbing State Line Hill through Monson. I dithered briefly about heading out to photograph it. I’ve only photographed New England Central’s trains about a thousand times (metaphorically).
When I went to make myself a cup of tea I discovered to my horror that there wasn’t any milk! Poor show. So, I made the most of both problems. I drove to Stafford Springs, where I waited all of five minutes to score a few nice bright shots of a pair of New England Central GP38s. (I made a couple of slides too—just for ‘the record). Then stopped in at the shop in Stafford Hollow for milk before heading home again.
New England Central freight 608 crawls through Stafford Springs, Connecticut on May 21, 2013. Canon EOS 7D with 28-135mm lens.Canon EOS 7D with 28-135mm lens; exposed at f8 1/500 ISO 200.
What I find interesting is that, 16 years ago I made similar images of the same GP38s in the same location! A lot has changed in that time. Back then New England Central was part of RailTex. Now, after a dozen years as a RailAmerica road, it’s a Genesee & Wyoming property.
Somehow, I doubt that in another 16 years I’ll still be able to make images just like these. But you never know. It’s nice having an interesting railway nearby.
6:38 am on the morning of May 10, 2013 finds heavy fog at Hospital Road in Monson, Massachusetts. This view is looking south on New England Central’s former Central Vermont Railway. Canon EOS 7D.
May 10th holds symbolic railroad significance as the anniversary of completion of the first Transcontinental Railroad in 1869—an event that had great national and international importance. Many other railway anniversaries can be linked to May 10 as well.
In 2007, I coordinated a team of 37 photographers to document a full day’s worth of North American railway activity from Nova Scotia to southern California and from the Pacific Northwest to southern Florida in what became a book titled The Railroad Never Sleeps published by Voyageur Press.
Although this seems to be out of print, it remains a stunning photographic collection, which is especially impressive considering it was entirely accomplished within the limits of just one day!It’s hard for me to believe that six years have passed since that day.
Yesterday (May 10 2013), I got up early and aimed for Palmer, Massachusetts, with an aim of making a variety of railway images on this significant day. In the course of just a few hours, I’d photographed five train movements on three different railroads. I was home by 9:30 am. (Although, I was out again later in the day to investigate some changes to railway infrastructure).
When I began my photography there was thick fog clinging to the valleys; this gradually burned off leaving bright sun. Here’s a selection of my efforts.
6:43 am. New England Central 608 led by GP38 3857 works south of Palmer Yard approaching Hospital Road in Monson, Massachusetts. On May 10, 2013, the sun was out, just not here. Canon EOS 7D.7:49 am. The fog had begun to lift when I made this view along Mass-Central’s former Boston & Albany Ware River Branch near Forest Lake, Palmer, Massachusetts. May 10, 2013. Canon EOS 7D.7:52 am. Here was a complete surprise for me; I was unaware that Mass-Central had borrowed a GATX GP15-2 locomotive until I saw it leading the northward freight. Some quick driving on my part put me in position at this broadside view where the line crosses Forest Lake. I was pleased, that’s a nice looking locomotive in fresh paint. Canon EOS 7D with 40mm Pancake Lens.Crossing the mountain from the Ware River Valley to the Quaboag River Valley, I heard CSX Q264 call the signal at CP83 in Palmer. I altered my course to intercept it at West Warren, where recent undercutting and brush work has opened up a nice view for morning trains headed east. The sun was just emerging from the fog at 8:15 am making for some rich soft light. Canon EOS 7D with f4.0 200mm lens.8:29 am. Only a few minutes behind Q264 was this eastward intermodal train. The sun was out brightly in Warren and I could hear the roar of EMD diesels well before the train reached me. Canon EOS7D with 28-135mm lens at 28mm.
Yesterday morning, jetlag had me awake and alert considerably earlier than I’m accustomed. By 7 am, I’d photographed three trains on two railroads in two states and was on my way home to get some work done. Crazy thing, jetlag.
New England Central’s former Central Vermont Railway line looking north toward Washington Street in Monson, Massachusetts. Canon 7D with an f2.0 100mm lens.
The highlight of the morning’s impromptu photo excursion was this image of New England Central’s ‘Pride of Palmer’ (GP38 3851) climbing through Monson, Massachusetts with a short freight for Willimantic, Connecticut. This is passing Monson’s ‘tornado alley’, where, nearly two years ago a freak afternoon twister made splinters and memories of many fine buildings and trees.
At 6:16 am on May 8, 2013, New England Central 3851 approaches the ‘Monson tunnel’, now nearly an underpass below Main Street. Canon 7D with an f2.0 100mm lens, ISO 400 exposed at f4.0 1/250th, white balance set for ‘cloudy.’New England Central 3851 approaches Main Street, Monson. Exposed with a Lumix LX3, set at ISO 200. Image modified with Adobe Photoshop to compensate for exposure extremes and to warm the color balance.
I’m not talking about stripping down and running naked through the snow. That sounds like a recipe for frostbite, hypothermia or worse! Rather, I’m focused on how to best select exposure when working in winter situations. Snow is especially difficult to work with for several reasons. First, it’s abnormally bright and results in high contrast situations that is both difficult on the eyes and the camera sensor. Second, most camera meters aren’t designed to work with fields of white, so tend to recommend the wrong settings. Third, for many photographers, making images in snow is an infrequent experience, and one that tends to lead to uncertainty and higher rates of exposure error.
A blizzard blanketed the Berkshires with 3-4 feet of snow during second week of December 1992. On the morning of Dec 15, 1992, I caught a Conrail C36-7 leading a pair of SD40-2s on TV9 climbing westward through the deep cut at Washington, Massachusetts. While parking was difficult (drifts up to seven feet tall block all the usual spots, so I left the car in the road with its four-way lights flashing) the real challenge was selecting the best possible exposure for this backlit snow scene. The image was exposed using my Nikon F3T and f4.0 200mm lens. My exposure was about f5.6 1/250 second on Kodachrome 25.
My approach to snow photography stems from years of practice. In general, I take the information provided by camera meters as advisory. I rarely rely on automatic settings without some manual adjustment. Why? I’ve learned to carefully gauge exposure and apply settings manually. Furthermore, I’m distrustful of automatic metering, especially for railway photography, because the automation is programmed to deliver adequate imagery other than what I’m trying to achieve. Perhaps no other situation is as difficult for a common-meter to gauge as sunlit snow imaging.
Many years ago, my father lent me a Weston Master III, and instructed me to wander around the house making exposures and write them down. No photos were exposed. I was about nine and I found this exercise confusing and frustrating because I didn’t understand what I was supposed to be doing. However, I overcame frustration and learned to use the light meter. A decade later, I had the opportunity to learn Cibachrome printing (used to make vivid prints from color slides). At the time, I was primarily working with Kodachrome 25, which I’d been taught to nominally underexpose to produce more saturated colors.
Translating Kodachrome to Cibachrome was revealing; I’d found that my rich, slightly-underexposed slides, which when projected on a nice bright screen looked fantastic, were in fact rather difficult to print. The biggest issue was contrast. While under-exposure may have enhanced the color saturation, it also made the image more contrasty. So while it turned out that my old theory on underexposure had it flaws, I discovered that slightly overexposed slides printed very well. I needed to determine ideal exposures in order to make optimal slides.
Aiding my efforts was my notebook; I’d been recording my exposures for years, but with the Ciba exercise I began making even more detailed notes, recording slide exposures to the third of a stop. Eventually, I assembled a chart with ideal exposures for Kodachrome 25 in various lighting situations. In general, I’d discovered that to make prints, slides needed to be about 1/3 stop brighter than I’d been making them for projection. All very well, but what does this have to do with making digital images in the snow?
Exposing Kodachrome is history, but the lessons I learned from this material still apply. (The short answer to the question was that snow in bright daylight should be exposed at approximately 1 ½ stops down from the full daylight setting without snow; thus with Kodachrome 25, if my normal daylight setting was f4.5 1/250, my snow exposure was about f8 1/250 +/- 1/3 stop). Many of my slides have appeared in books, magazines, as well as here on Tracking the Light. Take a look at my recent book North American Locomotives for some top-notch printed reproductions of Kodachrome.
Digital photography offers some great advantages over Kodachrome, including the ability to review images on-site—thus removing the uncertainty of exposing slides and having to wait for days (or weeks) to see if your exposures were correct. It’s now easier than ever to make good snow exposures and learn immediately from miscalculation. Related to this is the ability to use a digital camera’s histogram as an on-site exposure tool.
Histogram? Yes! This is perhaps the greatest feature on my digital cameras. It allows me to set my exposure ideally, allowing key images to capture the greatest amount information, thus minimizing detail lost through unwanted under-or over-exposure. Positively invaluable when making images in the snow.
Sunday February 10, 2013, I made this image of New England Central GP38s climbing State Line Hill at the Route 32 crossing South Monson. Nearly 61 years ago, Bob Buck exposed an image of Central Vermont 2-8-0s 462 and 468 leading a southward freight from the same angle at this crossing. There were fewer trees back then! See page 66 of my North American Locomotives for a full page reproduction of Bob’s dramatic B&W photograph.
Today, before a train enters the scene, I’ll make a series of test exposures and judge them by the output of the histogram. This allows me to refine my exposure to a point that exceeds what I could have achieved with my detailed chart and Kodachrome. In my next post, I’ll detail this process with more examples.
On command, my Canon 7D offers a variety of useful information. Here’s the in-camera thumbnail of NECR’s GP38s crossing Rt32 in South Monson with relevant histogram as displayed on camera screen. Learning to interpret the graph is extremely useful in making exposures in difficult situations. While I’ve balanced the exposure to favor detail on the locomotives, I’ve managed to retain satisfactory levels of detail in the piles of snow both side of the tracks. The image was exposed using my Canon 40mm Pancake lens.
Shafts of morning sun illuminate exhaust from the Palmer yard office, while snow is blown from tracks at New England Central’s yard on February 10, 2013. Temperature = 0 Fahrenheit; image exposed digitally with a Canon 7D and 200mm lens; ISO 200.
The media loves storms; and they always have. New England’s first big snowfall of the on February 8th and 9th, seems to have made news everywhere. Friends from London called to say that the New England storm was a lead-in story on BBC.
New England Central at Washington Street, Monson—looking north before the storm, Friday February 8, 2013. Lumix LX-3 photo.Two days later: New England Central at Washington Street, Monson—looking north after the storm, Sunday February 10, 2013. Lumix LX-3 photo.
On the morning the snow began, I made a few photos at Washington Street in Monson with my Lumix LX-3 (for later comparison). Historically this was the site of Monson’s railway station, gone nearly 60 years now. Blankets of snow fell on Monson, Massachusetts through the day on Friday and into Saturday. I spent Saturday clearing off cars and whatnot, as you do after a heavy snowfall. The railroads were quiet, and a general ban on highway travel, plus dire road conditions discouraged me from going anywhere to make photos.
Churning blades of the snow-blower clearing Palmer yard. Canon 7D with 200mm lens.
Clearing New England Central’s Palmer Yard on February 10, 2013. Canon 7D with 200mm lens.New England Central’s Palmer Yard on February 10, 2013.
This morning (February 10, 2013) I aimed for Palmer, where it was clear and bright, but all of 1 degree Fahrenheit. Between 18 inches and 2 feet of snow covered the ground, with drifts several feet deep in places. Yes, it was a good dump, but not a record by my estimation. I’ve seen more snow.
Clearing New England Central’s yard was a bucket loader fitted with a snow blower. This made for a few impressive scenes, which I’ve tried to capture here. However, in general, traffic on the railways was quiet. CSX sent a set of light engines east. These stopped about a mile west of Palmer (milepost 84.5) because what I understood to be an axle problem with one of the General Electric locomotives. After a few minutes, these were on the move, and I made some views of CSX passing the old Palmer Union Station at CP83—now occupied by the Steaming Tender restaurant—a favorite eating place of mine.
Mid-morning on February 10, 2013, CSX light engines roll eastward passed CP83 in Palmer, Massachusetts. The old Palmer Union Station is now the Steaming Tender restaurant. Canon 7D with 28-135 zoom lens. Exposed at ISO 200 f10, 1/1000 second, metered manually.
About noon, New England Central dispatched a pair of GP38s south as ‘Extra 608’. Although once standard, today finding a pair of New England Central’s yellow and blue GP38s together is a rare treat. These ambled southward through Monson over Stateline Hill (so named because it crests near the Massachusetts-Connecticut border), which allowed ample opportunities for photographs. Extra 608 was destined for Willimantic to help clear the line and collect interchange left by the Providence & Worcester. All in all, this was a productive day for photography. I worked with my Lumix LX-3, Canon 7D, and Canon EOS-3. The Velvia 50 I exposed won’t be processed for a while; I’m on the big green bird tomorrow afternoon! Perhaps while traveling, I’ll write a detailed post on my experience exposing railway images in the snow.
New England Central extra 608 approaches Bridge Street in Monson, Massachusetts on February 10, 2013. Canon 7D with 100mm f2.0 lens.New England Central extra 608 at Stafford Springs, Connecticut on February 10, 2013. Lumix LX-3 photo.Trailing view of New England Central GP38s passing Stafford Springs, Connecticut. Canon 7D with 40mm pancake lens.
Artificial light illuminates the snow at New England Central’s Palmer, Massachusetts yard office on the evening of February 22, 2011. How much snow covers the yard tonight? And how much will be there by Saturday morning (February 9, 2013)? Exposed with Lumix LX-3 on a Bogen tripod. Set on aperture priority mode, f3.5 at ISO 80, with a plus 1 stop override to compensate for snow and artificial lights. If I’d allowed the camera to pick the exposure without compensation, an underexposed (dark) image would have resulted.
Tonight (February 8, 2013) a blizzard rages outside the window. The roads are closed, the railroad is quiet (so far as I know), and I’m not out, knee-deep in snow, trying to make night photos. (Ok, so I’m as mad as hatter, or worse—used to be lots of hatters here in Monson, back in the day.) However, I pulled up an image from my digital archive of Florida East Coast GP40-2 417 at New England Central’s Palmer Yard office on February 22, 2011. There’s something incongruous about a Florida East Coast locomotive in the snow. I’d met Bob Buck of Tucker’s Hobbies that evening for dinner, and later we’d stopped by Palmer yard to see what was about.
Since that night, nearly two years ago, New England Central has applied its own lettering to several former Florida East Coast locomotives; Bob has passed on; and New England Central has become part of the Genesee & Wyoming short line railway empire. Everything changes.
Southward New England Central freight along Plains Road, near Sweetheart Lake, south of Stafford, Connecticut shortly after sunrise on January 13, 2013. Canon 7D with 40mm ‘Pancake’ lens; ISO 200 f4.5 at 1.500th second—intentionally ‘underexposed’ and adjusted in post processing using Photoshop to maintain desired detail and balance in highlight and shadow areas.
One of the benefits of my visits to Monson, Massachusetts, is being within ear-shot of the former Central Vermont Railway, now operated by New England Central (NECR). Yesterday morning (January 10, 2013), I awoke to the sounds of a southward freight clawing its way up Stateline Hill (so-named because it crests near the Massachusetts-Connecticut state line). NECR freights take their time ascending the grade and on a clear day I can hear them climbing from about the time they depart the Palmer Yard. As a kid I’d count the crossings: CV’s GP9s whistling a sequence of mournful blasts for each one. Yesterday morning I dithered for a few minutes. Should I go after this train? Or, should I keep my nose to grindstone, writing? Clear skies forced the answer: GO!
My hesitation caused me to miss the opportunity for a photograph in Stafford Springs, Connecticut. This was blessing in disguise, since I’ve often caught the train here and then broke off the chase before getting deeper into Connecticut. Having missed Stafford Springs, I pursued further south, and caught the train four times at various points between Stafford and Willimantic. This a relatively easy chase, as Route 32 runs roughly parallel to the line.
Three elements made yesterday’s chase a satisfying exercise:
1) The train was operating at a suitable time of the morning for southward daylight photography (lately, NECR’s trains seem to have headed south either way too early or too late in the day for my photographic preferences—I’ve been photographing this line for more than 30 years, first chasing it with my Dad in the early 1980s, so I can be unusually choosy).
2) It was a ‘clear blue dome’—sunny, bright, and cloudless, always a great time to make morning photographs.
3) As it turned out, one of New England Central’s yellow and blue GP38s was leading. As I’ve mentioned previously, while this was once NECR’s standard locomotive, in recent years the type has become comparatively scarce on NECR, with many of the locomotives working the line wearing paint of former operators (Conrail, Union Pacific, Florida East Coast, and others).
I was also eager for a clear day to test some recently acquired equipment, especially my new Canon 40mm Pancake Lens, which arrived on Monday. I’ll make this lens the detailed topic of future posts.
New England Central’s southward freight approaches Mansfield Depot, Connecticut. Canon 7D with f2.8 200mm lens; ISO f5.6 at 1/1000 second, ‘Landscape’ ‘picture style’ (no adjustments except for scaling).
After abandoning NECR at Willimantic, I made a few photographs of the town, which still has some wonderful old mill buildings, then continued south to New London where I focused on Amtrak for a while.
Since New England Central is among properties recently acquired by Genesee & Wyoming, I’m anticipating change and wondering when I’ll photograph the first orange & black locomotives
See my recent published book North American Locomotives for more information on New England Central’s and Genesee & Wyoming locomotives.
New England Central at Willimantic Yard as viewed from the famous footbridge (must be famous, it has its own plaque). NECR shares this yard with Providence & Worcester with which it interchanges traffic. Canon 7D with f2.8 200mm lens; ISO f8 at 1/640 second, ‘Landscape’ ‘picture style’ (no adjustments except for scaling).Old thread mills at Willimantic, Connecticut. Exposed using Canon 7D with 40mm ‘Pancake’ lens; f9.0 at 1/500th second, no adjustments except for scaling.
This image appears on page 49 of my book Vintage Diesel Power published by Voyageur Press in 2010. I exposed it on October 13, 2008, courtesy of Genesee Valley Transportation. GVT was operating the locomotive on its Falls Road Railroad between Lockport and Brockport, New York. This is a relatively rare Alco RS-32 built for New York Central. It often operated on the Falls Road for New York Central and later Penn Central. The photo was exposed with a Canon EOS-3 and 20mm f2.8 lens on Fujichrome film.
Locomotives have long been the subjects of photographic study. The earliest images are believed to be Daguerreotypes from the early 1850s. As early as the 1860s, locomotive manufacturers routinely photographed locomotives to document their construction and to help interest prospective buyers. The nature of the steam locomotive meant that a great deal about the machine could be gleaned by studying it from the outside. Railway enthusiasts were enamored with locomotives from the very beginning; sketches and drawings of engines date to the earliest days of railroading, while railway enthusiast photography certainly dates to at least the 1890s, if not earlier. While I’ve always been fascinated by railways, I didn’t routinely examine locomotives on film until I was about ten. My earliest railway photography tended to feature signals. If there were any locomotives in my pictures, these seemed to appear on the horizon in the form of a looming headlight. Later, I made a great many images of locomotives, sometime picturing them at work, other times resting between jobs, and often I examined them on a macro level; in other words, up-close and in detail. I’ve written a number of books on locomotives, and these chronicle their evolution and development, intended application and service, and performance. My body of locomotive photography has aided in illustration of these efforts. This selection of images is intended as the first installment in Tracking the Light of my exploration of locomotive geometry: the shapes of the machines. Later installments will focus on specific railway fleets, individual types, and perhaps some individual machines.
Mass-Central NW5 2100 is an old favorite. Built for Southern Railway in 1947 to work the New Orleans Union Station, it found its way to Massachusetts when I was in junior high school. On the afternoon of October 18, 1983, my late friend Bob Buck of Tucker’s Hobbies in Warren phoned to say that Mass-Central was on its way to Palmer to collect interchange from Conrail. I caught the antique Electro-Motive engine by the old Boston & Albany freight house. Exposed with Leica IIIA with Summitar f2.0 50mm lens on Kodachrome 64 slide filmI grew up to the sounds of Central Vermont GP9s roaring away in run-8 as they clawed their way up State Line Hill in Monson, Massachusetts. I often photographed these locomotives in my youth. By the time I made this photo on December 23, 1986, I had begun my photographic studies at Rochester Institute of Technology, and was back for Christmas Break. Old 4442 was a favorite machine. It is climbing State Line as it had countless times before. Leica IIIA fitted with a Leica Visoflex II and 65mm Elmar Lens, Kodachrome 25 slide film.
In February, 1995, New England Central Railroad (NECR) assumed operations of the former Central Vermont Railway. By that time, CV’s GP9s had been gone a few years. NECR’s first locomotives (and the only ones painted for the line) were a fleet of handsome GP38s. By the late 1990s, these were an equivalent age as had been CV’s GPs when I knew them a decade earlier, yet somehow they didn’t seem so ancient. After all, age is largely perception. NECR GP38s rest in the afternoon sun at Palmer Yard in March, 1997. Nikon F3T with Nikon 24mm f2.8 Lens, Kodachrome 25 slide film.Former Boston & Maine Alco S4 1271 was on a siding at Middleborough, Massachusetts, on July 10, 1987. Warm afternoon sun was ideal for a study with Kodachrome, so I put my recently purchased Leica M2 and 50mm Leitz Summicron to work.Baltimore & Ohio GP9 6145 worked on Rochester & Southern’s former B&O Brooks Avenue Yard in Rochester while I was studying at the Rochester Institute of Technology. I made many photographs of this Electro-Motive diesel; this image exposed on October 22, 1987. with my Leica M2, 50mm Summicron and Kodachrome 25 slide film. If I knew why it was called “The Mighty Jumbo”, I’ve forgotten now.
Preserved Western Pacific diesels at Portola, California, on May 10, 2008 capture the spirit of another era. This image appeared in my 2009 title Railroads of California published by Voyageur Press. The photo was exposed on Fuji Velvia 100 slide film using a Canon EOS-3 and 100mm f2.0 lens. WP 608 is an Electro-Motive Corporation model NW2 built in 1940 for Union Pacific, and later acquired by WP. While WP 707 is a GP7 bought new by the railroad.I’ve always enjoyed intense sound produced by Electro-Motive’s 20-cylinder 645 diesel engine. That doesn’t translate to photography, except that I have a disproportionate number of images of diesels powered by that engine. On May 4, 1996, I made this photo inside Wisconsin Central F45 6656 to feature the big prime mover. Exposed using a Nikormat FT3 with Nikon 28mm AF lens, Fujichrome Provia 100 slide film, exposed manually.
New England Central GP38 3850 shoves on the back of southward freight number 608 crossing Route 32 in South Monson. Contax G2 with Zeiss 28mm Biogon lens, Agfa Scala black & white reversal film.
I often make interesting images when I’m just playing around. Between 2001 and 2007 I regularly worked with a Contax G2 rangefinder and I typically used it to expose either Fuji color slide film or black & white negatives. One day, in autumn 2001 I loaded the camera with Agfa Scala, a distinctive black & white reversal film that when processed offered high-contrast monochrome slides. Among my subjects was New England Central which runs right through Monson, Massachusetts. This day, the southward freight required a helper out of Palmer Yard to assist its ascent of State Line Hill. While not unheard of, New England Central doesn’t use helpers every day. I caught the train several times with my G2, then waited an eternity for the slides to come back. No fault of the lab: after I sent them in, I’d returned to Dublin, and so it was about three months from the time I exposed the photos to when I finally examined them. Interesting! That was eleven years ago now.
New England Central’s 608 climbing State Line Hill approaches Smith Bridge (Stafford Hollow Road). This was a favorite spot of my late friend, Robert A. Buck of Warren, Massachusetts, and on many occasions he photographed Central Vermont’s 2-8-0s here laboring up the grade. There were fewer trees back then. (And even more in 2012 than in 2001!) Contax G2 with 28mm Zeiss Biogon lens, Agfa Scala black & white reversal film.The old coal elevator at Squires Lumber & Hardware in Monson, Massachusetts. This classic structure was dismantled a few years after I made this photo. Contax G2 with 45mm Zeiss Planar lens, Agfa Scala black & white reversal film.
New England Central SD40-2 722 pauses on the former Central Vermont Railway bridge over the Millers River at Millers Falls, Massachusetts on December 9, 2012. Canon 7D 28-135mm lens at 135mm, ISO 200, f5.6 1/400th second.
This morning (December 9, 2012), New England Central 603 worked north from Palmer, Massachusetts to the Pan Am Railways interchange at Millers Falls. To pick up and drop cars, the train worked a north-facing switch that required it to pull out onto the high bridge over the Millers River. The span is classic; a pin-connected Pratt deck truss built in 1905 by the American Bridge Company of New York. The contrast of New England Central’s former Union Pacific SD40-2 on the 107 year old truss looks more like a model railroad diorama than a scene typical of modern American freight railroading. Here the soft early-afternoon sun accentuates the diesel’s details, while offering a stark view of the bridge structure against the backdrop of late-autumn trees. In the summer fully foliated trees tend to minimize the impact of the bridge’s cross members.
I’m mindful of pending change. New England Central is a Rail America railroad, and if the Surface Transportation Board approves Genesee & Wyoming’s bid to acquire Rail America, New England Central’s operations and locomotive colors may soon be different. The implications for photography are impossible to gauge, but the wise photographer will capture the scene as it is today and make the most of every opportunity, for each may be the last.
