It was a bright and clear Sunday morning in January 1988 when I exposed this Kodachrome 25 slide with my Leica M2 with 50mm Summicron at Rochester & Southern’s Brooks Avenue Yard near the Rochester Airport.
Rochester & Southern’s yard at Brooks Avenue was just a ten minute drive from the Rochester Institute of Technology.
When I was in college, I had an open arrangement with the railroad to make photographs, and during the late 1980s I often dropped by to exercise my cameras.
In April 1989, I made these photographs of Genesee & Wyoming Alco C-424M 62 on the Brooks Avenue scale track.
The Alco Century’s well-balanced cab design made these among my favorite classic diesels. I’d photographed the C-424Ms on Delaware & Hudson, Genesee & Wyoming, Guilford, and finally on Livonia, Avon & Lakeville’s Bath & Hammondsport line.
Here I’ve worked the yard office into my composition that makes for nice juxtaposition of shapes. Black & White film handles the backlit situation well and retained detail in shadows and highlights.
Compare my telephoto and wide angle views.
Tracking the Light Posts Every Day!
A Bit of History on Film.
Does anyone even remember friction bearings? By the 1990s, these were all but a forgotten technology, replaced with the omnipresent roller bearings. Southern Pacific’s season sugar beet racks were once of the few exceptions and continued to work until about 1992 with the old technology.
However, prior to that in January 1988, I had a class project at the Rochester Institute of Technology (Rochester, New York) that involved making photos of railroad workers. I’d arranged through the Rochester & Southern to spend time around Brooks Avenue Yard.
I spent a lot of time there, relative to what was required of me for the class.
At one point the general manager, or someone in the know, directed me to a rip track where workers were packing friction bearings. This was really an arcane aspect of railroading.
I exposed a series of black & white negatives in the 645 format using my father’s Rolleiflex Model T. It was a dull cold day. I think I was using Verichrome Pan (rated at 80 ISO) to get a period effect. I used a wide aperture, probably f3.5, which gave me shallow depth of field.
Verichrome was a difficult material to work with in low light and my negatives were very thin.
To make the most of these photos I used an unusual printing technique: I intentionally printed the photo darker than normal, then used a potassium-ferrocyanide solution to bleach the highlights. I did this both across the print in a tray, and using a cotton swab on select areas such as the around the journal boxes.
The result is more or less as you see it here. This print has been in a box since 1988 and has hardly ever seen the light of day. (Incidentally, in case the name doesn’t suggest it to you, potassium-ferrocyanide is decidedly unhealthy, so use it cautiously, if you must.)
I don’t think my professor was especially impressed with my results. What did he know about bearings anyway?
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Brooks Avenue Yard, September 23, 1987.
Among my favorite locomotives are Electro-Motive’s classic end-cab switchers, of the sort introduced in the mid-1930s with EMC model SC.
I became familiar with this type as a result of an O-Gauge Lionel NW-2 dressed for Santa Fe that my father bought for me about 1972. Later, I watched and photographed full scale switchers on Penn-Central, Conrail and Boston & Maine.
This type in effect emulated the shape of the common steam locomotive, allowing the engineer to look down the length of the hood, instead of a boiler. Electro-Motive wasn’t first to use this arrangement, which Alco introduced in the early 1930s. But, it was the Electro-Motive switcher that I found to have a classic sound and shape.
When I was studying at the Rochester Institute of Technology in the late 1980s, Rochester & Southern’s Brooks Avenue Yard was just a few minutes away. I routinely stopped by the yard to see what was going on.
At that time, R&S 107—a former Southern Pacific SW1200—could be routinely found drilling cars. Over the years, I made a number of images of this old goat.
I left Rochester in 1989. I wonder what has become of this switcher? Does it still sport the SP-order oscillating lights?
See previous Tracking the Light posts: Lehigh Valley 211 at Lincoln Park, Rochester, New York; Genesee & Wyoming at P&L Junction, November 4, 1987; and Two Freights 24 Hours Apart
Tracking the Light posts new material daily.
Explore Tracking the Light’s archives for more than 300 previous posts.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
Free Film, a Borrowed Camera and a Bit of Luck!
In November 1986, Kodak supplied me with a free roll of TMax 100 black & white film as part of a ‘care package’ of new products for students in the Photographic Illustration programs at the Rochester Institute of Technology .
The T-Max black & white films were brand new at the time. They were significant because they used a new ‘T’ grain that featured flat silver halide grains that were supposed to reduce the visual granularity in the film (and lower the film’s silver content).
On this bright sunny morning, I went trackside in Rochester to expose my free film. I had Kodachrome 25 in my Leica M2, so I borrowed my roommate’s Canon A1 for the film test.
I photographed a variety of Conrail trains on the former New York Central Water Level Route. I made this image of Rochester & Southern’s Belt Line local crossing the former Buffalo, Rochester & Pittsburgh bridge over Water Level Route at Lincoln Park, west of downtown Rochester. (In 1986, Genesee & Wyoming’s Rochester & Southern assumed operation of the former BR&P 4th Sub-division from CSX’s Baltimore & Ohio.)
Leading R&S’s local was Alco RS-3m 211 leased from the recently formed Genesee Valley Transportation.
The locomotive has a long and colorful history. It featured both a large steam generator and dynamic brakes (thus the high short-hood) and was one of only five RS-3s were built this way: four served Western Maryland, while this one went to the Pennsylvania Railroad but later was traded to the Lehigh Valley, becoming its 211. After 1976, Conrail replaced 211’s original Alco-244 diesel with a recycled 12-cylinder EMD 567 engine.
Since I made this image, the locomotive has been preserved and restored at the Rochester & Genesee Valley Railroad Museum in Rush, New York.
Tracking the Light posts new material every morning.
Please spread the word and share Tracking the Light with anyone who may enjoy seeing it!
http://briansolomon.com/trackingthelight/
