Chicago is well suited for night photographs. On the evening of June 11, 2013, Chris Guss and I took advantage of warm and windless weather to make a variety of railway images in the downtown area.
I employ a variety of techniques to make night photos. This evening, however, I emphasized my Canon EOS 7D and turned up the ISO to unusually high settings in order to stop the action.
Union Station as viewed from Roosevelt Road. Exposed with my Canon EOS 7D with a 70-200mm f2.8 zoom lens at f2.8 1/40th second, ISO 6400 Camera was firmly mounted on a tripod.
Where color slide film essentially topped out at 400 ISO. My 7D allows me to dial in up to 6400 ISO. Does this offer the same clarity of ISO 100 or 200? No, of course not. But, it’s not so bad either. Is this high ISO technique the only way to make night photos? Hardly, there are many good ways to go about exposing images at night and this is just one.
An Amtrak train passes CP 21st at Chicago’s 21st Street Bridge. Handheld Canon EOS 7D with a 40mm pancake lens, 1/6th second at f.3.2 5000 ISO. It helps to have a rock steady hand.Chicago’s 21st Street Bridge looking south from the nearby grade crossing. Canon EOS 7D with 40mm pancake lens at 1.20th second at f2.8. ISO 5000. This image is a bit pixelated and not as sharp as I’d like, but not bad all things considered.
Today, I can make photos digitally, that would have been all but impossible with film. (Although, that’s never stopped me from exposing a few slides here and there anyway).
Another philosophy: low ISO with long exposure. This makes for a sharper and less pixilated image, but doesn’t allow for stop action of moving trains. In this case I used my Lumix LX3 on a miniature Gitzo tripod positioned on the railing of Roosevelt Road. Exposure: f3.5 at 3.2 seconds, ISO 80. (The camera was set in aperture-prioritiy ‘A’ mode, but I manually over exposed by 2/3s of a stop to compensate for the bright sodium vapor lights and dark sky which tends to cause the camera’s automatic metering to lean toward underexposure.)