{"id":990,"date":"2012-12-31T12:10:33","date_gmt":"2012-12-31T12:10:33","guid":{"rendered":"http:\/\/briansolomon.com\/trackingthelight\/?p=990"},"modified":"2012-12-31T14:48:40","modified_gmt":"2012-12-31T14:48:40","slug":"irish-rail-cherryville-junction-6-december-2003","status":"publish","type":"post","link":"http:\/\/briansolomon.com\/trackingthelight\/irish-rail-cherryville-junction-6-december-2003\/","title":{"rendered":"Irish Rail\u2014Cherryville Junction, 6 December 2003"},"content":{"rendered":"

In 2003, Irish Rail<\/a> operated its sugar beet trains via Kildare because the normal routing between Waterford and Limerick Junction was closed as result of a bridge collapse at Cahir, County Tipperary. On December 6, 2003, I was in place at Cherryville Junction (where the Waterford Road joins the Cork Road\u2014a few miles west of Kildare Station) to catch a laden sugar beet train on its way from Wellingtonbridge, County Wexford to Mallow, County Cork. (Since there is no direct chord at Cherryville to allow a movement from the Waterford Road onto the Cork Road in the down direction, this sugar beet train would continue up to Kildare where the locomotive would run around, thus allowing the train to reverse direction for its onward journey to Mallow.)<\/p>\n

 <\/p>\n

\"General<\/a>
Irish Rail laden sugar beet train at Cherryville, Junction 6 December 2003.<\/figcaption><\/figure>\n
\"That<\/a>
That same day, I was also fortunate to intercept locomotive 124 and a three-piece Mark3 push-pull, normally assigned to the Limerick-Limerick Junction shuttle, returning from Dublin after working a ‘relief’ from Limerick Junction.\u00a0<\/figcaption><\/figure>\n

It was a characteristically dull day. I was working with a Rollei Model T (120 size roll film fitted with a f3.5 Zeiss Tessar<\/a>) and Fuji Neopan\u2122 400 film. Key to obtaining the desired tonality was my process. For developer I used Agfa Rodinal Special\u2122 1:32 with water for 7 minutes, then after dual fixing baths, Perma Wash\u2122 for 3 minutes, and 10 minutes in running water, I toned the negatives in selenium solution (mixed 1:9 with water) for 9 minutes, then re-washed for 20 minutes in running water. (Warning: selenium is poisonous and should be handled with extreme care in a well-ventilated room). See: Installment 6: Black & White revisited; Old Tech for a New Era part 2\u2014Secrets Revealed!<\/a>.<\/p>\n

\"For<\/a>
For comparison, I\u2019ve scanned the entire 120 size negative strip. This is in color and unmodified during scanning. The slightly purple tone is a result of the selenium toner. The two primary benefits from toning negatives with selenium solution are improved highlight density and better archival quality. While the effect is subtle, it adds snap to photographs exposed on a dull day.<\/figcaption><\/figure>\n

 <\/p>\n

\"Cherryville<\/a>
Irish Rail class 141 diesels 160 and 148 lead empty beet wagons at Cherryville Junction on 6 December 2003. The train has taken the switch and is headed toward Waterford.<\/figcaption><\/figure>\n
Related articles<\/h6>\n